The Tele Vue EBX-2120 2" Eyepiece Barrel Extender increases backfocus distance and provides a mounting location for 2" (48mm) eyepiece filters. It can also help parfocalize eyepiece sets. Extender adds 1.2-inches to the 2" barrel.

Models with dual 2" / 1¼" barrels can use the extender.

The EBX-2120 makes the 12mm approximately parfocal with the 17mm and 22mm Nagler Type-4 eyepieces when used in a Tele Vue 2" diagonal.

Because the field stop is located near the bottom of the chrome eyepiece barrel, you will need to rack your focuser out further, relative to most other eyepieces. If you find that you cannot rack your focuser out enough to achieve focus, Tele Vue strongly recommend you purchase the EBX-2120. This will make Tele Vue's 55mm Plössl eyepiece approximately parfocal with the Tele Vue 27mm Panoptic eyepiece.

Feature List

• 4 x 12V DC Power outlets for your equipment (A single channel to switch all four outputs ON/OFF via software)
• 12 Amps of total distributed current
• Adjustable Output (3, 5, 7, 8, 9, 12Volt) / 3Amps (Can be switched ON/OFF) Power your DSLR / Mirrorless camera
• Embedded Powered USB3 Hub – 2 x USB2 Ports & 2 x USB3 Ports Available (USB3 ports are backwards compatible with USB2 devices)
• 1 x Power USB Port (up to 3Amps) – Suitable for Raspberry PI 3/4 power
• EXT Port (RJ12) for external accessories (E.g External Focus Controller)
• 2 Channels PWM Dew Heaters – RCA Outputs (Adjust power levels via software)
• Humidity and Temperature Sensor (included)
• Auto Tune Dew Heater Channels
• Reverse Polarity Protection
• USB / PC Controlled or Standalone Operation out of the box
• Lightweight and extremely compact aluminium enclosure

Built in Amp-Meter

An Amp-meter placed after the DC input reports the total electric current.

There are also three additional amp-meters: One for the 12V outputs and two for the Dew Heater Channels. This allows you to easily monitor the detailed and overall power consumption of your equipment.

More than 12A of total electric current

The powerbox has been designed to output up to 12 Amps of electric current. Please note that a usual backyard astrophotographic setup requires 5-7 Amps

Embedded USB3 Hub

A powered USB3 Hub at the back of the device provides:

• 2 x USB3 SuperSpeed Ports
• 2 x USB2 High-Speed Ports.

The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.|

USB Port Configuration under PPBADV Gen2

• USB Port1 supports USB2 devices
• USB Port2 supports USB2 devices
• USB Port3 supports USB2 & USB3 devices
• USB Port4 supports USB2 & USB3 devices

* Older product revision (Gen1) had only 3 out of 4 USB Ports that were compatible to USB2 devices. For detailed information please check the product manual.

USB High Power Output

USB Port 1 provides up to 3Amps of current. You can connect any device that requires 5V. E.g a Raspberry PI 3/4 or Intel Compute Stick M3/M5 can receive power from this specific port.

Expansion Port (EXT)

EXT (expansion) port is available for device expansion. This RJ12 socket allows the connectivity of current and future Pegasus Astro products. Plugged devices can be controlled from Pocket Powerbox Advance standalone software or dedicated ASCOM driver.

Still carrying your bulky tripod box to remote observing sites? Let us lighten your load with our sleek, protective, padded tripod carrying case, the perfect storage solution for transporting your gear anywhere with ease and confidence. It’s truly a must-have for tripod owners of all stripes.

Ultra-durable Material

The Tripod Soft Case is constructed from 900 denier polyester for durability and weather resistance. Its walls are lined with 16mm thick EPE foam to protect your gear. The bottom panel is reinforced with a hard layer of PVC for extra protection from minor bumps.

Unzip the case and you’ll discover a soft polyester interior lining with adjustable straps to hold your tripod firmly in place.

In addition, the case features an external zippered pocket to hold eyepieces and other accessories. Lastly, you’ll find sewn-on fabric loops on the outside of the case. Use these to clip even more accessories to the exterior of the case.

Grab and Go

Transport your case one of two ways: via the pair of sewn in handles or optional, clip in padded shoulder strap for hands-free carrying.

Compatible Celestron Tripods

This tripod soft case can hold tripods under 34” long, including the tripods in these Celestron telescope kits.

This T-Ring fits EOS M-mount mirrorless cameras only. It will not work with other Canon camera bodies like the EOS RF-mount or EOS EF-mount model cameras without adding a Canon adapter to convert those cameras to M-mount.

A T-Ring is one of the first accessories you will need to take pictures through a telescope or spotting scope. If you have a Canon EOS mirrorless camera body, the Celestron EOS M-Mount T-Ring is the one for you.

How to Use
To use this T-Ring, place the M-Mount T-Ring on your Canon mirrorless camera. Just like changing a lens, line up the T-Ring to your camera’s lens mount. Push it in and turn until you hear a click. The T-Ring has a sturdy bayonet flange that locks for a secure fit. Once you attach the T-Ring to your camera, you’re ready to connect your telescope. The telescope side of the T-Ring has threads that accept a variety of camera adapters, including the Celestron T-Adapter. The adapter you choose depends on the type of photography you wish to do.

Body
The Canon M-Mount 42mm T-ring is machined aluminum black anodized. The internal surfaces are blackened and glare-threaded to provide the highest contrast. The T-Ring has a ribbed surface for a secure grip while threading/unthreading. The Canon M-Mount 42mm T-Ring is compatible with M42 x 0.75 (T-Thread) camera adapters.

TMB PlanetView Planetary Eyepieces:

The TMB PlanetView Planetary Eyepiece series is designed for high-magnification planetary and lunar observing, delivering sharp, high-contrast views with excellent eye comfort. Choosing the right focal length for your telescope typically provides a significant upgrade in magnification and fine detail compared to the stock eyepieces supplied with most telescopes, making planetary features clearer and easier to observe. Featuring a 5-element optical design and a wide 58° apparent field of view, these eyepieces offer a more immersive experience than traditional narrow-field planetary designs while maintaining the crisp detail needed for serious observing.

Fully multi-coated optics and internal baffling maximise light transmission and suppress stray reflections, improving contrast on subtle planetary features and fine lunar detail. The large eye lens and generous eye relief make these eyepieces comfortable to use, especially during long observing sessions or when wearing glasses.

Built with an all-metal housing and a fold-down rubber eyecup, TMB PlanetView eyepieces are robust, practical, and compatible with all standard 1.25" focusers and filters. They are also Bintel’s number one recommended first upgrade for most telescopes, offering one of the simplest and most noticeable improvements you can make to planetary and lunar performance.

The 8mm TMB PlanetView:

The TMB PlanetView 8mm Planetary Eyepiece offers a comfortable balance between magnification and image stability for high-power observing.

Works particularly well with:

• • Celestron StarSense Explorer LT70 AZ Refractor Telescope

  • Celestron StarSense Explorer LT80 AZ Refractor Telescope

  • Celestron StarSense Explorer DX6" SCT Telescope

  • Celestron NexStar 6SE Telescope

  • Celestron NexStar Evolution 6 Telescope

  • Saxon 909 AZ3 Telescope

  • Saxon 12" Dobsonian Telescope

  • Sky-Watcher 12" Dobsonian Telescope

  • Celestron StarSense Explorer 12" Dobsonian Telescope

Specs:

The CA-B clamp adapter connects SWAROVSKI OPTIK binoculars and the BTX eyepiece module with the VPA 2. With the included insert rings, the clamp adapter can be adjusted to perfectly fit the respective size of the binoculars or the BTX eyepiece module.

Please note - Swarovski VPA2 required!

The Bintel 13 Bar is a universal Wide Style Dovetail bar, Designed with all refractors and reflectors in mind. Please look at the dimensions below to see if this dovetail is suitable for your telescope.

No Hardware is included with this dovetail

Bintel UHC Narrowband Filter – 1.25"

The Bintel UHC Narrowband Filter is designed to dramatically improve contrast when visually observing emission nebulae, especially from light-polluted suburban and city skies. By selectively passing key nebular emission lines while blocking common artificial light sources, it helps faint objects stand out more clearly against a darker background sky.

Unlike broadband filters, the UHC’s narrower passband delivers stronger contrast on classic nebulae such as The Orion Nebula, The Carina Nebula, The Lagoon Nebula and so many more. Even under urban lighting, brighter nebulae become easier to detect, while dark-sky observers will appreciate the added structure and subtle detail revealed.

Advanced multilayer dielectric coatings provide excellent transmission (over 97% across the passband) while fully blocking major light pollution lines. This high efficiency makes the filter particularly effective with small to medium aperture telescopes. Ion beam–hardened coatings ensure long-term durability and scratch resistance.

Key Features

• Ultra High Contrast (UHC) narrowband design for visual observing

• Strong enhancement of emission nebulae contrast

• High transmission at H-beta (486.1nm) and OIII (495.9nm & 500.7nm)

• Over 97% transmission across the passband

• Effectively blocks common light pollution wavelengths

• Durable multilayer dielectric, ion beam–hardened coatings

• Standard 1.25" filter thread fits most eyepieces

Specifications

• Type: UHC light pollution suppression filter

• Size: 1.25" (standard thread)

• Material: Optical glass with aluminium cell

• Application: Screws directly into the barrel of 1.25" eyepieces

An essential visual filter for anyone who enjoys observing nebulae, the Bintel UHC Narrowband Filter delivers noticeably darker skies, brighter nebulae, and more rewarding views, especially where light pollution would otherwise limit what you can see.

By selecting very precisely the wavelengths of Hydrogen Alpha (H-alpha) and Oxygen III (O-III), found mainly in nebulae, the filter will increase the contrast between the Stellar object and the sky background. Thus, its use makes it possible to obtain a higher-quality image, with sharper stars and finer details.

<

Keep only the essential

The Dual Band filter has been designed to allow only two particular wavelengths to pass through to the Vespera sensor:
– O-III
– H-alpha

Due to the filtered wavelengths, it is particularly effective for photographing nebulae in emission (e.g.: Orion nebula M42, Heart nebula IC 1805 …), dark nebulae endowed with hydrogen (e.g.: Horsehead or Elephant’s Trunk nebula…), planetary nebulae (e.g.: Owl nebula M97, Dumbbell nebula M27…), supernova remnants (e.g.: Veil nebula, Crab Nebula M1…).

For globular clusters (e.g.: Hercules cluster M13, cluster M92…), the selectivity of the Dual Band filter will help you to obtain sharper stars.

A filter specifically studied for Vespera

The optical quality of the Dual Band filter has been specifically studied by our engineers to offer use at full aperture, without any impact on the optical diameter of the instrument. The lens ring is equipped with an electronic micro-card that allows Vespera to detect the Dual Band filter and adapt its observation and image processing parameters.

Transmission curve

The filter features 12nm of bandwidth in each wavelength (O-III = 500.7nm, H-alpha = 656.3nm).

Additional information

The Bintel 7.9 Bar is a universal Wide Style Dovetail bar, Designed all all refractors and reflectors in mind. Please look at the dimensions below to see if this dovetail is suitable for your telescope.

No Hardware is included with this dovetail

Every astronomer needs a red-light torch to let the handle and adjust their telescopes, mounts, cameras and other accessories.

Astronomers use red-light torches to preserve their "night vision" - the way our eyes adjust to seeing in low light conditions after about 20-30 minutes. BINTEL worked with Astronomy Night to assist with the best settings for astronomers when using this torch.

This NML-C flashlight offers two lighting outputs, a twin LED flashlight and dual coloured red or white COB light output. Both the flashlight and COB light incorporate full brightness adjustment control, ideal for astronomers and night vision support.

Integrated with a 270° rotating arm, this flashlight also includes a magnet and hook to help with placement for that perfect light direction.

Red light colour

The NML-C Astronomy Torch is inspired from the star NML Cygni, a red hypergiant from the Cygnus constellation. NML Cygni is approximately 2700 times bigger than our sun and is one of the largest and luminous stars in the milky way.

Specifications

Flashlight maximum Lumens: 300
Flashlight colour temperature: 6500 Kelvin
Flashlight LED wattage: 2.5 Watt (x2)
COB light maximum lumens: 350
COB light colour temperature (white): 6000 Kelvin
COB light colour temperature (red): 1000 Kelvin
COB light wattage: 6 Watt
Operating temperature: 0 - 50
IP Rating: 44
Dimension (mm): 151 x 49 x 36
Weight: 255 grams

Included in the box

x1 Flashlight
x1 USB-C 1.0m cable
x1 USB-C to Micro adapter
x1 Velcro cable support strap

Running Time

Flashlight
2.5 hours - Maximum
8 hours - Low

COB light white
2 hours - Maximum
6 hours - Low

Charge time:
4 - 5 hours

USB output:
2 hours @5 Watts

Switch Function

On - Flashlight high - COB light white high - COB light white Low - COB light red high- COB light red low - Off
+ Increase brightness to 100%
- Reduce brightness to 1%

Connections

USB input: Type C, 5.0 Vdc, 1.0A, 5.0W
USB output: Type A, 5.0 Vdc, 1.0A, 5.0W

TMB PlanetView Planetary Eyepieces:

The TMB PlanetView Planetary Eyepiece series is designed for high-magnification planetary and lunar observing, delivering sharp, high-contrast views with excellent eye comfort. Choosing the right focal length for your telescope typically provides a significant upgrade in magnification and fine detail compared to the stock eyepieces supplied with most telescopes, making planetary features clearer and easier to observe. Featuring a 5-element optical design and a wide 58° apparent field of view, these eyepieces offer a more immersive experience than traditional narrow-field planetary designs while maintaining the crisp detail needed for serious observing.

Fully multi-coated optics and internal baffling maximise light transmission and suppress stray reflections, improving contrast on subtle planetary features and fine lunar detail. The large eye lens and generous eye relief make these eyepieces comfortable to use, especially during long observing sessions or when wearing glasses.

Built with an all-metal housing and a fold-down rubber eyecup, TMB PlanetView eyepieces are robust, practical, and compatible with all standard 1.25" focusers and filters. They are also Bintel’s number one recommended first upgrade for most telescopes, offering one of the simplest and most noticeable improvements you can make to planetary and lunar performance.

The 7mm TMB PlanetView:

The TMB PlanetView 7mm Planetary Eyepiece is an excellent high-magnification choice for Schmidt-Cassegrain telescopes and large Dobsonians.

Works particularly well with:

• • Celestron StarSense Explorer LT70 AZ Refractor Telescope

  • Celestron StarSense Explorer LT114 AZ Newtonian Telescope

  • Celestron StarSense Explorer DX6" SCT Telescope

  • Celestron NexStar 6SE Telescope

  • Celestron NexStar Evolution 6 Telescope

  • Celestron StarSense Explorer DX5" SCT Telescope

  • Celestron NexStar 5SE Telescope

  • Celestron NexStar Evolution 5 Telescope

  • Saxon 909 AZ3 Telescope

  • Saxon 12" Dobsonian Telescope

  • Sky-Watcher 12" Dobsonian Telescope

  • Celestron StarSense Explorer 12" Dobsonian Telescope

Specs:

One of the key benefits of LiFePO4 chemistry is its safety. Unlike traditional lithium-ion batteries, LiFePO4 batteries are extremely stable and have a low risk of thermal runaway. This means you can use the PowerBox 500 with peace of mind, knowing that your devices are protected. LiFePO4 batteries are also more environmentally friendly, as they contain no toxic materials, making them a great choice for those who are eco-conscious. In addition to its safety and environmental benefits, LiFePO4 chemistry provides longer lifespan and higher cycle stability compared to other battery chemistries. This means you can enjoy reliable and consistent performance from your PowerBox 500 for years to come. In fact, we’re so confident we’re offering an unprecedented 3-year warranty!

With a 288Wh capacity, this power station delivers enough power to keep your devices charged and running for hours. Whether you're camping, tailgating, or simply need backup power during a power outage, this power station is the perfect solution. Featuring multiple output ports, including USB-A, USB-C, AC, and DC, power a wide range of devices, from smartphones and tablets to laptops and cameras. Need a light? The PowerBox 500 will carry the torch in the form of an integrated LED strobe and flashlight! A compact and lightweight design, the PowerBox 500 is easy to carry wherever you go. With its cutting-edge chemistry and wide range of uses, this is the ultimate energy companion for anyone who needs to stay connected and powered.

Specifications:

Stylish and handy red lantern light to help with all kinds of astronomy!

Please note: switches on to low-level red illumination

Illuminated by filament LED lights with an optional triple cluster or warm white and cool white LED's or a separate red LED night mode with precise color temperature to preserve celestial visibility.

Powered by a USB C rechargeable lithium battery and includes a handy elastic mounting band for quick attachment to your telescope tripod or mount. The Stellar FL is the ideal LED lantern for your astronomy and camping adventures.

Stella Filament Lantern (FL) is inspired from interstellar nebula. A nebula is a distinct luminescent part of interstellar medium, which can consist of ionized, neutral, or molecular hydrogen and also cosmic dust.

Features:

• Lithium rechargeable battery
• Red light output (Astro mode) with 3 brightness settings
• Filament LED light
• Cool LED light output
• Warm LED light output
• USB C charging input
• Dimmable brightness control
• Rubber elastic mounting band with carabiner hook
• IP44 Weatherproof

Specifications:

• Filament maximum lumens: 125
• Filament colour output: 4000 Kelvin
• Warm white LED maximum lumens: 55
• Warm white LED colour output: 1000 Kelvin
• Cool white LED maximum lumens: 130
• Cool white LED colour output: 5500 Kelvin
• Red LED maximum lumens: 35
• Red LED colour output: 1000 Kelvin
• Operating temperature: 0 - 50
• IP Rating: 44
• Dimension: 104 x 104 x 98 mm
• Weight: 150 grams

Included in the box:

x1 lantern
x1 Carabiner
x1 USB-C 1.0m cable
x1 USB-C to Micro adapter
x1 Velcro cable support strap

Battery Information:

• Battery type: Lithium 18650
• Battery size: 2000 mAh, 3.7V (x1)
• Battery capacity: 2000 mAh @3.7V, 7.4 Wh
• Battery chemistry: Lithium NMC

Switch Functions:

Red LED Astro mode:

Single press:
On - Low - Medium - High - Off

Double press:
Switches light modes between red light and white light modes

White Filament and LED mode:

Single press:
On - Filament LED’s High - Warm LED’s High - Cool LED’s High - Filament and all LED’s on - Off

Press and hold:
Activates dimming ( High to Low ) and ( Low to High)
Note: the LED light will flash when lowest and highest brightness is reached

Single press (after a 5 second delay) will turn the light off.

Note: The user will need to cycle to the desired light colour mode with in a 5 second period, after the 5 seconds the light will turn off after a single press.

QHYCCD has designed a dedicated Off-Axis Guider (OAG) for the miniCAM8, featuring a large 14×10mm prism. The oversized prism maximizes light throughput to the guide camera, enabling higher guiding precision. It comes with a standard M48 telescope interface for easy connection and maintains a 55mm back focal distance for broad compatibility with imaging setups.

Easily mount your DSLR camera to an astronomy setup with this handy adapter. This accessory allows to connect a ball head adaptor on top of the star adventurer mount. It features a 3/8″ thread. The base is a Vixen-style dovetail, making it compatible with a wide range of telescope mounts and accessories. Ideal for wide-field astrophotography or piggyback setups.

Universal Dovetail Plate Short

Hole Separation of 60mm, 2.00 inch, 35mm, 1.5 inch, 1.25 inch.

Fits Astro Physics, Astro-Tech, Borg, Celestron, Explore Scientific, Meade, Orion, Parallax, Questar, Stellarvue, Takahashi, TeleVue, Vixen, William Optics

Wt. 1.2 lbs., Length 7", thickness 0.7"

Our sealed and certified switching power supply unit is the perfect match for our Pegasus Astro Products. It can provide 12V and up to 10Amps. (120W of total power). Low ripple and noise ensures that you will provide the required and correct “electric juice” to your precious equipment. Comes together with a power cord (1.5m) for your country type.

The Luminos series eyepieces offer a wide 82º field of view in both high power and low power models, allowing you to make the most of your telescope, whether you own a short, fast refractor or a Celestron EdgeHD telescope. The optical set consists of six or seven elements (depending on the model) and is fully multi-coated for crisp, sharp views. All six Luminos eyepieces are parfocal, which means you can switch out eyepieces during observing sessions with little or no additional focusing required.

The Luminos eyepiece body is made of polished and anodized aluminum. A rubber grip runs around the equator of the eyepiece, giving you a secure grip and an easy method for raising and lowering the retractable eyecup. Simply twist the rubber grip to adjust the height of the eyecup. The insert barrel is threaded to accept filters.

Normally available for pickup or shipping approx. 2-3 business days from your order

Side dovetail bar (trapezoid shaped)
Length of dovetail bar: 108mm
Width of wider part of the trapezoid base: 43mm
Thickness: 14mm

Base (bottom part with the photo threaded bolt)
Length 125mm (together with the thickness of the dovetail bar on the side it’s 135mm)
Width 44mm
Thickness: 12mm
Length of recess: 70mm

Enjoy a more comfortable viewing experience with your StarSense Explorer Tabletop Dobsonian telescope with this adjustable-height tripod. Adding this solid, sturdy tripod allows you to set up your Tabletop Dobsonian at the perfect viewing height for everyone in your group and avoid lower obstructions.

Durable Construction

The Tripod for StarSense Explorer Tabletop Dobsonians securely locks your Dobsonian base and telescope to the tripod using three captured screws on the underside of the mounting plate. The integrated accessory tray functions as a center support to make the entire structure stiff and rigid. It can also hold up to five additional 1.25” eyepieces. The all-metal tripod is constructed from high-quality materials that can withstand years of use in tough outdoor conditions.

Viewing Comfort

Achieve the perfect viewing position with ease. The tripod comes with three adjustable, stainless steel 1.5" diameter legs. Whether you prefer to observe standing up or sitting down, you can find the most comfortable position for an immersive stargazing experience. The raised tripod helps to combat viewing obstructions like fences and low-profile trees.

Designed with portability in mind, this tripod is lightweight and foldable, so it’s easy to transport and set up at your favorite observing locale. Spend less time assembling and more time exploring the wonders of the night sky. When you’re done observing, the legs fold inward and stow neatly under the mounting plate.

Lack of a trusty USB3.1 Hub in astrophotography market, triggered us to develop the Pegasus Astro USB Control Hub which will be also able to switch ON/OFF each USB port.

We proudly present the Pegasus Astro USB Control Hub (in short UCH):

A SuperSpeed (SS), low power, switchable USB3.1 Gen1 hub and fully compliant with USB-IF’s USB 3.1 Gen1 specification . The Hub supports Hi-Speed (HS), Full Speed (FS) and Low Speed (LS). The new SuperSpeed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.

6 x USB3.1 Active Ports

USB Control Hub uch_3-2
The device has 6 x USB 3.1 Ports. All ports are backward compatible with USB 1.0 and USB 2.0 devices.

Each port can deliver up to 2.5Amps of current. There is a smart current limit sensor in every port which automatically limits or cuts power in case of a short-wire or power consumption that is above 2.5Amps.

Each port is monitored by the USB Controller and in case of a current limit, it triggers a warning pop up in the operating system.

Industrial grade temperature support

Most USB Hubs in the market (well…nearly all of them) operate under room temperatures as they were design to work inside your cosy warm room. This is one of the reasons why you experience USB disconnects and instability during a cold night.

Our product is certified to work flawlessly from −40°C to +85°C. All USB Hub electronics has been selected to support Industrial grade temperature ranges.

Aluminium Enclosure

A high quality robust, blue anodised aluminium enclosure houses the electronics of the USB Hub. The metal enclosure designed and tested to survive ±5kV ESD strikes

Switchable USB Ports

Each USB port can be controlled and switched ON/OFF by our standalone software. (power + data). You are going to love this feature. No more pull out and re-plug USB cables of your equipment.

12V DC Operation

The 12V DC operation was our first design requirement. As most of your astro-equipment requires 12V DC why to use something different? Hub accepts 12-14V of operation. This means that you can plug unregulated 12V power from a battery.

Expansion Port (EXT)

A RJ12 external ports allows future device expansion

Features

• 4 x 12V DC Power outlets for your equipment (A single channel to switch all four outputs ON/OFF via software)
• 12 Amps of total distributed current
• Adjustable Output (3, 5, 7, 8, 9, 12Volt) / 3Amps (Can be switched ON/OFF) Power your DSLR / Mirrorless camera
• Embedded Powered USB3 Hub – 2 x USB2 Ports & 2 x USB3 Ports Available (USB3 ports are backwards compatible with USB2 devices)
• 1 x Power USB Port (up to 3Amps) – Suitable for Raspberry PI 3/4 power
• EXT Port (RJ12) for external accessories (E.g External Focus Controller)
• 2 Channels PWM Dew Heaters – RCA Outputs (Adjust power levels via software)
• Humidity and Temperature Sensor (included)
• Auto Tune Dew Heater Channels
• Reverse Polarity Protection
• USB / PC Controlled or Standalone Operation out of the box
• Lightweight and extremely compact aluminium enclosure

Built in Amp-meter

An Amp-meter which is installed right after the DC input, reports the total electric current.

Moreover, there are three additional amp-meters: One for the 12V quad outputs and two for the Dew Heater Channels. This allows you to easily monitor the detailed and overall power consumption of your equipment.

Other Key Features

Standalone Operation
“out of the box”

Pocket Powerbox Micro can work “out of the box” as a standalone device. Just plug the cables, setup the “autodew” functionality and every time you boot the device, it will retrieve your settings. So, If you don’t like to connect to a PC every time, you don’t have to. Simple as that!

Two channel duty cycle
PWM outputs

Two Pulse width modulation (PWM) outlets are capable to provide power to your “thirsty” Dew Heaters. No more moisture fuzzing your equipment and destroying your clear nights. These outlets can be remote-controlled from your laptop using the supplied software.

Auto Adjustment of
PWM (Dew Outputs)

The controller can auto adjust the heater power levels by consulting the environmental sensor Dew Point reading. Just click “Auto” and leave to Pocket Powerbox Micro to decide if it is time to turn on and precise tune the level of your dew heaters.

More than 10A of
total power

The powerbox has been designed to support up to 10 Amps of total current.

Led Indications for power and failure states

Led can blink in patterns to warn you about important power issues (e.g over or under voltage). Also, light can be turned off by using the software. Our LED is very dim but in case you don’t like it on you can switch it off

Reverse Polarity Protection

Pocket Powerbox Micro has been design with a reverse voltage polarity protection. It will definitely save your night if you accidentally connect the main power supply in reverse polarity!

A hardware
watchdog

A hardware watchdog resets the device if for any reason there is no response from the controller for two seconds. A neat feature in the unlikely event of a controller freeze – when you have a remote observatory and you need to be certain that everything works as expected.

Upgradable
Firmware

Device is firmware upgradable to support future features and bug fixes.

The Luminos series eyepieces offer a wide 82º field of view in both high power and low power models, allowing you to make the most of your telescope, whether you own a short, fast refractor or a Celestron EdgeHD telescope. The optical set consists of six or seven elements (depending on the model) and is fully multi-coated for crisp, sharp views. All six Luminos eyepieces are parfocal, which means you can switch out eyepieces during observing sessions with little or no additional focusing required.

The Luminos eyepiece body is made of polished and anodized aluminum. A rubber grip runs around the equator of the eyepiece, giving you a secure grip and an easy method for raising and lowering the retractable eyecup. Simply twist the rubber grip to adjust the height of the eyecup. The insert barrel is threaded to accept filters.

Standard 1.25″ T-adapter fits on any telescope that uses a 1.25″ eyepiece focuser for prime focus photography.

The standard 1.25″ T-adapter fits on any telescope that uses a 1.25″ eyepiece focuser for prime-focus photography. The T-mount is manufactured from durable metal aluminum alloy.

The CA-Bs clamp adapter connects the CL binoculars with the VPA 2. With the included insert rings, the clamp adapter can be adjusted to perfectly fit the respective size of the CL binoculars.

Please note - Swarovski VPA2 required!

The Celestron StarPointer Finderscope is the way to go if you want the easiest way possible to locate an object and center it in your eyepiece.

A red dot finder, unlike an optical finder, has 1x magnification, displays a super wide field of view, and keeps the sky right side up and left-to-right correct, matching what you see with your unaided eyes. An LED creates a red dot, superimposed on a viewing screen, so you simply point the StarPointer to the area or object you wish to observe, look through your eyepiece, and if properly aligned, the area in and around place you pointed the red dot will be centered in the field of view.

If you like the idea of having some magnification, try installing both a red dot and optical finder on your telescope. Schmidt-Cassegrain and EdgeHD telescopes have multiple mounting bracket holes so you can get the best of both worlds. Just make sure to align both of them correctly, and you’ll get the best use out of each of your finders.

How to Align the StarPointer Finderscope

The first time you use your finder, you need to align it. This one-time setup procedure should be done during the day. Take the telescope outside and find an easily recognizable object, such as a streetlight, car license plate, or tall tree. The object should be as far away as possible, but at least a quarter mile away. Move the telescope left and right or up and down so that it is roughly pointing at the object. Look through the telescope using your low power eyepiece and move the telescope until the object you chose lies in the center of the view. Once the object is centered in your eyepiece, turn on the red dot. With your head positioned about a foot behind the finder, look through the round lens of the finder and locate the red dot. Without moving the telescope, use the two adjustment knobs located on the side and underneath the finder. One controls the left-right motion of the dot. The other controls the up-down motion of the dot. Adjust both of these until the red dot appears over the same object you are observing in the eyepiece.

Your finder is now aligned and should not require realignment unless it is bumped or dropped. You can even take the finder off the telescope and reattach it while preserving alignment.

Specifications

Celestron X-Cel LX series eyepieces offer a 60º apparent field of view, perfect for the Moon, the planets, and a plethora of deep-sky objects. The premium six-element optical set is finished with multiple layers of high-transmission coatings for clear, sharp images. The edges of the optics are blackened for increased contrast. All seven X-Cel LX eyepieces sport 16 mm of comfortable eye relief, and are parfocal, which means you can switch out eyepieces within the series during observing sessions and little or no additional focusing will be required.

The X-Cel LX eyepiece body is made of black-anodized aluminum. The pop-up eyecups make it easy to adjust the height for different users. Turn them in one direction to extend the length, and the other direction to provide a flat surface, preferable to most eyeglass wearers. A threaded rubber grip around the center of the eyepiece barrel offers secure handling, even in moist conditions or with heavy gloves on. The 1.25” insert barrel is threaded to accept filters.

Quick Glance

• Up to 12V / 20Amps of provided electric current (240W).
• 6 x 12V smart and individual switcable outputs. Each output can be configured as constant 12V or pulse width modulated driven).
• Wi-Fi or USB Controllable Operation.
• 2 x 12V / Always ON Outputs.
• 3 x Dew Heaters Outputs.
• (Automatic Adjustable with AutoDew feature)
• 1 x Adjustable Power Output 3-12V -Regulated Output of 3Amps
• 1 x Adjustable Power Output 12-24V – Regulated Output of 4 Amps
• 1 x Power Relay switch 250V/10A
• 6 x USB3.1 (backwards compatible with USB2) and 2 x USB2 available ports (8 USB ports in total). Individual switchable via software.
• Stepper Motor Controller (Silend and low vibrating stepper controller. Can drive nearly any stepper motor in the astro -market up to 2Amps per coil).
• Physical push-button to control one function (e.g turn ON / OFF outputs). Functionality is configurable in software.
• Built-in ambient temperature and humidity sensor.
• Power readings (Input Voltage, Current, Current per port).
• Vesa compatible size enclosure.

In total 8 USB ports powered – USB 3.1 SuperSpeed Hub

• 6 x USB 3.1 Super-Speed ports
• 2 x USB 2 High-Speed ports

6 x 12V DC Power outlets for your equipment

Built-in Power Sensors

Individual Current Meter per 12V smart outputs.

Additional Power Outputs and Sensors

• 2 x Always ON 12V outputs increase the total 12V outputs to 10. In combination with the 2 x adjustable outputs (if configured to 12V) the total 12V outputs can be summed to 10 Outlets.
• 1 x Adjustable Voltage Step Down output can be regulated from 3V ro 12V of and provide up to 3 Amps.
• 1 x Adjustable Voltage Step Up output can be regulated from 12V to 24V and provide up to 4 Amps.
• 1 x Switch Relay can pass 250V / 10A and used to switch ON/OFF any 3rd party equipment.
• A built-in ambient temperature and relative humidity sensor provides frequently readouts of the environmental conditions and automatically adjusts the heat intensity of your Dew strips.

Embedded Stepper Motor Controller

Supported Stepper Motors

Vesa compatible enclosure