We have designed a new 5-wire bus communication box that controls the Series-5 Focuser and Rotator, which includes M12 circular 5-wire threaded connector heads for environmental sealing.

• The Series -5 Controller has been designed for:
  • Operating the Series-5 Focuser and Rotator
  • Powering the fans for temperature control on DeltaRho Astrographs, as well as CDK12.5 to CDK24 telescopes
  • Powering and controlling the telescope’s built-in anti-dew heating pads.
• Includes M12 circular 5-wire threaded connector heads for environmental sealing.
• Controlled via our PlaneWave Interface 4 software with ASCOM support.

If you're looking for a moderate microscope with the bells and whisltes, look no further than the saxon Prodigy MK II Biological Microscope 40x-1600x.

Featuring a quadruple nosepiece with magnification up to 1600X, specimens can be observed at their finest with just a turn of the objective lens. The addition of coaxial coarse and fine focus dial means getting down to the sharpest details of the specimen. This sturdy microscope is also equipped with a mechanical stage that has locator markings so it not only holds a slide in place, but also allows you to mark your specimen.

The light intensity dial also gives you the option to adjust the brightness from the transmitted LED.

So whether it is for research or homework, the saxon Prodigy MK II Biological Microscope 40x-1600x is a good microscope to work with.

The Atik EFW3 2" 7 Position electronic filter wheel for large format cameras can be ordered with the ability to either carry up to 7 × 2” mounted round filters, housing LRGB and Ha, OIII and SII filter sets in the same carousel and the wheel is fully compatible with any Atik astrophotography camera when using the supplied M54 or M42 adaptors.

7 Position Electronic Filter Wheel for Large Format Cameras

The Atik EFW3 2"gives you more freedom and convenience to your imaging set up.

For a large format wheel, the EFW3 boasts a slim, lightweight design. It measures 238×213mm dimensions and weighs in at just approx. 850g. This is great news for large format set ups where weight can be a real concern. That said, the wheel is fully compatible with any Atik camera when using the supplied M54 or M42 adaptors. We’ve simplified the technical side of the design from the EFW2 to further improve reliability and minimise component wear and tear. However, it's still machined from solid aluminium to produce a durable and quality wheel that will keep turning, night after night.

Atik 16200 users will also be pleased to know that the EFW3 can either be attached directly to the camera as it is, or after removing the front plate to further minimise any backfocus requirements. With the front plate attached, the backfocus is 41.5mm, while the backfocus with the front plate removed is just 34.5mm.

On the software side of things, the EFW3 has a full ASCOM driver, so any complaint software can be used to control it. Additionally the EFW3 can be controlled using our Artemis Capture software, for simple and efficient operation

New from Sky-Watcher - the smallest member of their Esprit range of APO triplet refractors

The Sky-Watcher 70mm Esprit 70EDX Triplet APO Refractor is a professional instrument for the most demanding and exacting astrophotographers. The air spaced apochromatic triplet lenses have exceptional colour correction over the entire visible spectrum there is no chromatic aberration even on bright objects! Knife edge baffles reduce internal reflections and increase contrast, helping to bring out faint structure in deep sky objects.

Main Features:

• Air Spaced 70mm Apochromatic Triplet
• 490mm Focal Length
• Fully multi coated lenses
• Optional 0.92x Reducer Available

In The Box:

• 70/490 Apochromatic Refractor
• Retractable Dew Shield
• D Style dovetail Bar and rings w/handle
• Aluminium Foam-Lined Case

Specifications:

Specifications 

• Add to the versatility of your L-350 mount with this external Right Ascension axis balance accessory.
• Balance of the mount is important for optimal direct drive motor performance and with this accessory users have the ability to fine tune the adjustments.
• The accessory includes one 2 lb and one 10 lb weights.

• Diameter: 100mm
• Length: 18cm
• Weight: 1.1kg
• Compatible with Sky-Watcher Wave 100i/150i mounts

The All NEW iOptron CEM120EC2

An extraordinary innovation in mount design...Now with a new payload!

Recognizing the growing demand for an accurate and stable, equatorial mount with the versatility to carry larger instruments and more complex imaging arrays, we created the iOptron CEM120EC2. It offers the benefits of our revolutionary “center balance” design: stability, accuracy, and smooth mechanical operation, while capable of carrying a payload up to 52 kg. The “center balance” design’s natural stability is due to its focusing the mount along with payloads weight directly over the center of the pier or tripod. Along with the stability aspect, the CEM120 features an advanced cable management system consisting of more ports in more locations preventing tangle ups and reducing the chance of fractured cables. They also add some new features to the CEM family like Wi-Fi and LAN for remote operation and easy to use, reliable clutches on both axes.

The CEM120EC2 utilizes two high resolution encoders, one on each axis. The two encoders enable the mount to perform dual axes tracking. With advanced sky modeling the CEM120EC2 will be able to account and adjust for polar alignment error as well as changes in atmospheric (refractive) distortion. Fixed home sensors on each axis, allow the mount to save alignment models after power off too to be used on future nights.

Optional Extra's

Optional heavy duty Tri-Pier 360 and Permanent Pier are available for order.

/product/ioptron-tri-pier-360

Optional Tri-Pier adapter for light weight payload ( 8036-120) is also available for $239. It can be modified for permanent pier mounting.

Features

• A new design, center-balanced equatorial mount (CEM) for maximum payload with natural stability
• Observatory astrophotography mount ideal for both visual and Astro-photographers
• Payload of 115 lbs (52 kg) with the mount weight of 57 lbs (26 kg)
• Easy to use and reliable gear clutches
• Precision altitude and azimuth adjustment.
• Precision stepper motor with 0.07 arcsec accuracy for precise GOTO and accurate tracking
• Polar alignment routine for those who can't see the Pole Star
• Go2Nova® 8407 V2 controller with Advanced GOTONOVA® GOTO Technology with built in heater
• Dual high precision encoders on both RA and DEC
• High precision tracking with low periodic error (PE)<0.15 arcsec RMS
• Real time periodic error correction (RPEC)
• 32-channel Global Positioning System (GPS)
• Built-in WiFi and LAN for remote operation
• Integrated ST-4 autoguiding port
• Advanced cable management system with more choices
• Spring loaded, individual adjustable Losmandy saddle

Supplied with an American power supply from factory

Specifications

Manuals and Instructions

Quick Start Guide

Instruction Manual

AUX port plug (DIN-422) assembly

Latest Firmware

SKU: 7302

Saxon PSB X1-3 Deluxe Stereo Microscope features 10x and 30x magnification, 57mm working distance and ac powered illumination. This microscope is suitable for teachers and students, hobbyist, collectors and enthusiasts who wish to study and observe three-dimensional objects.

The microscope head is not only height adjustable but and also rotatable at 360 degrees with a twist at the knob for individual preferences. The 45 degree incline eyepieces also provide optimum comfort during viewing.

To change between magnifications, gently twist the objective lens and adjust until the subject comes into focus. Illuminated with tungsten from the top bulb, this stereo microscope is suitable for schools, dissections, studying of gems, rocks or circuit boards. The metal clips on the stage keep your slides and subjects in place for easier viewing.

For added versatility or optical enhancement, the eyepieces can be removed and replaced with a suitable alternative.

Available eyepieces:
WF16x

What is in the box:

Spec for the Saxon PSB X1-3 Deluxe Stereo Microscope

Specifications

saxon SmartOne Stereo Microscope 20x-80x

The SmartOne Stereo Microscope is a versatile and high-performing optical instrument, ideal for hobbyists, educators, and professionals in fields such as repairers, electronics, and gemology. Designed for precision and ease of use, this microscope provides sharp, three-dimensional views of specimens for detailed examination. 

Key Features:

• Magnification: 20x, 30x, 40x, 60x, 80x
• Binocular Viewing Head: Provides a comfortable, ergonomic experience during prolonged use.
• Objectives: Equipped with 2x and 4x objectives for adjustable focus and clarity.
• Eyepieces: Includes 10x, 15x and 20x wide-field eyepieces for enhanced viewing flexibility.
• Stage: Comes with a Black/White Contrast Plate and a Frosted Glass Plate for enhanced sample visibility.
• Illumination: Bright and even LED illumination for detailed observation.

Applications:

• Education: Ideal for home schooling, schools, and universities.
• Industrial Use: Ideal for inspecting circuit boards, small parts, and precision engineering.
• Gemology & Hobbies: Perfect for jewelry inspection, coin collection, and crafting.

The saxon SmartOne Stereo Microscope combines quality optics, a robust design, and ease of use, making it an excellent choice for both professionals and enthusiasts.

• The Series-5 focuser is a large capacity focuser for use with Alt/Az, or equatorially mounted systems.
• The focuser is capable of lifting 40 lbs (18 kg) with a travel range of  0.6-inches (15,200 microns).
• The Series-5 focuser can be stacked with the Series-5 rotator for a complete focusing rotator solution (combined 2.78″ of occupied backfocus).
• Occupies only 1.675” of backfocus.
• 464.4283 encoder counts per micron
• Controlled via PWI4 software for autofocusing and optional field de-rotation (if using an Alt/Az mounted system).
• Requires the Series-5 Controller.
• Compatible with the DeltaRho 350 and RC700 telescopes.

The Benro GH2FL Gimbal Head is a collapsible mount designed for spotting scopes, perfect for users who need a portable and space-saving solution. It is ideal for fast-moving wildlife observation and birdwatching.. Its unique folding design allows for easy storage and transport, while the hollow construction reduces weight without compromising durability.

With a load capacity of 10 kg, the GH2FL can support large, heavy spotting scopes. The gimbal head provides smooth and stable movement, enabling you to track fast-moving objects both vertically and horizontally with ease, ensuring sharp, clear views.

The head consists of three components: the base, corner bracket, and quick-release platform, all of which can be used together or separately.

• Low Profile Base: This allows you to mount larger spotting scopes, with a vertical clamp for Arca-Swiss compatible plates. The base has 360-degree rotating mechanisms on both the horizontal and vertical axes for smooth, fluid movement. Separate knobs control pan and tilt adjustments, with a short throw for quick locking of your selected position. The vertical digital scale ensures precise and repeatable height adjustments, while the digital scale on the pan dial allows for accurate angle control. A built-in bubble level helps align the horizon for optimal viewing.

• Corner Bracket: The vertical bracket features an Arca-Swiss plate for secure mounting, while the horizontal section has clamps for additional Arca-Swiss compatible plates on both sides.

• Quick-Release Platform: The PL100N quick-release platform, compatible with the Arca-Swiss system, allows for quick, secure mounting of your scope. The platform’s elongated shape provides additional balancing options depending on the lens used. A double-locking safety feature ensures your scope stays securely in place, and boundary boards on the platform prevent any accidental shifts.

Transportation Options:

1. Fold the head directly onto the tripod for compact storage, taking up minimal space.
2. Remove the head from the tripod, fold it, and store it in the included bag. The bag features a rigid frame and internal dividers, with a handle and a removable shoulder strap with padding for easy carrying. A metal carabiner is also included for additional convenience.

The Benro GH2FL Gimbal Head is the ideal tool for observing wildlife, tracking birds, or capturing dynamic moments during sports events with precision and stability.

• Add to the versatility of your L-Series mount with this two-axis adjustable saddle to co-align two optical tubes.
• This saddle accepts Losmandy-D style dovetail plates and secures to the L-Series declination/altitude axis.
• Fits L-350, L-500, and L-600 mounts.

Introducing the HEM27 and the HEM27EC, iOptron’s revolutionary hybrid harmonic drive mounts. These light weight, high payload tiny titans will deliver an astronomy experience like never before. Imagine a mount head weighing in at 3.7KG (8.15lbs) with a payload capability 13KG (29.74lbs), without needing a cumbersome counterweight or shaft. Applying iOptron’s multi decade experience creating precision mounts, the HEM27 brings this vision to reality.

Utilizing state of the art harmonic drive technology for the RA movement in tandem with backlash-free DEC worm/belt drive design, the HEM27s deliver unparalleled weight to payload efficiency. Its black anodized all metal CNC machined body is not only appealing to the eye, it’s a rugged platform that will perform at the highest level for many years to come. Unique features such as an electronic friction break and power down memory allow the mount safely stop and resume a GoTo slew or continue tracking even after an abrupt power loss (No need to realign and start from the beginning).

* 200mm, with payload center of gravity to the RA rotation axis. Or an OTA size of ~220mm.

HEM27_Manual

PlaneWave L350 Direct Drive Mount

The L-Series combines versatility, simplicity and affordability by combining all the technology of our Observatory class telescopes into a compact stand-alone mount. In its Alt/Az configuration it is considerably more compact than its equatorial counterpart, allowing a larger telescope to fit in a smaller enclosure. Unlike German Equatorial mounts, there are no meridian flips to deal with, and no large protruding counterweights to create a dangerous hazard in a public observatory. Alt/Az is more intuitive to use and no polar alignment is needed. Besides, it is the way the pros do it!

L-Series Mounts Features:

• Direct-drive motors on each axis for smooth, fast, and virtually silent movement of the telescope
• Slew speeds up to 50 degrees per second
• High resolution encoders on each axis for precise positioning
• Zero backlash
• Zero periodic error
• PointXP mount modeling software
• Enclosed electronics
• Through the mount cabling

FEATURES:

MOUNT SYSTEM

CONTROL SYSTEM

MOTION CONTROL

SYSTEM PERFORMANCE

Price is ex Store

Check the PlaneWave website for Instructions and Schematics.

Precision Machined Aluminium. Anodised for long life

Clutch knob set (2)

R.A. and DEC. with (3) handles @ 30 degrees.

Suits GM 8, G-9 and G-11 mounts.

Makes clutch knobs easier to use, and gives greater clutching range.

Tele Vue Mounting Ring Set 5 Inch

Our ring sets provide rigid mounting for astro-imaging with our 4" and 5" scopes. Bottom and top of each ring is drilled for ¼”-20 hardware, have bat-handle locks, and two Tele Vue accessory slots for ring-mounted accessories such as Starbeam with Tele Vue base, Sol-Searcher, Piggy-Cam and others.

Sets come with a top accessory bar, bottom mounting plate to allow spacing them 5.5″ to 6.5″ apart. The included bottom plate (BPL-1098) is drilled to mate to a variety of mounts or mounting adapter plates – including the Tele Vue/Vixen Mount Adapter (AVT-1011) and Tele Vue Gibraltar-5 Head.

For NP127is or any telescope with outside tube diameter of exactly 5-inches.

Specifications for the Atik 414EX Colour

Sony EXview HAD CCD II ICX825 sensor - Super Sensitive

The fact that you're reading this this shows you've made it past the most common trap in choosing a camera for astroimaging - how many megapixels is it?

There are 2 variables in your camera that are far more important to consider when imaging faint deep sky objects. Sensitivity and noise.

The sensitivity tells us how many precious photons will be converted to signal...this is were the Sony ICX825 shines! But how much more sensitive is it? Compared with Atik's previous 314L+ at 650nm, the 414EX is 60% more sensitive. In fact, the 414EX is even more sensitive than the already spectacular 460EX, making it the perfect camera for the enthusiast with a limited budget. The graph below shows the striking difference between the ICX285 and ICX825:

Low noise and effective cooling

Atik's 414EX has more than just great sensitivity.

Another feature of the 414EXmaking it a winner for astrophotography is it's exceptionally low noise. When capturing a stunning portrait of your favourite deep sky target you will understand how delicately faint it is. This means the data you wish to capture is sparse.

If the electronics of the camera add noise (unwanted signal) to your image the end result will be lacking in detail and contrast. To ensure the contribution from noise is minimised Atik's 414EX has thermoelectric cooling that can easily lower the CCD chip to 30ºC below ambient, and is regulated, so that your image calibration is consistent. This results in a noise level so low that for most applications dark frames are an option rather than a requirement. The upshot is that you can spend more time imaging!

Specifications

Features

Reticle

The Saxon 12" DeepSky （305/1500）Dobsonian Telescope is the perfect partner to begin your astronomy adventure with. This affordable telescope comes with a "paraboloidal" primary mirror to eliminate spherical aberration and a four-arm, secondary-mirror bracket with fine supports (0.5mm thick) to reduce diffraction spikes and light loss.

This telescope comes with an aperture of 305mm and a focal length of 1500mm in a 12" tube. This scope features quality parts and accessories - the special roller-bearing construction, Crayford focuser, eyepieces and finderscope are all designed to aid with your observing experience. Once assembled and with a little practice, you'll soon be able to find and view the rocky surfaces of the Moon, planets in the Solar System as well as deep sky objects such as star clusters, double stars, nebulae and galaxies.

The Saxon 12" DeepSky Dobsonian Telescope requires no additional tools during assembly and is incredibly easy to use, making it the perfect scope for beginner astronomers.

What is Dobsonian Telescope and Why the Tension Control Handle?

A simple, elegant form of an alt-azimuth mount made to carry a Newtonian reflector was popularized by John Dobson in the late 1970's. The Dobsonian mounted telescope is popular among amateur astronomers and telescope makers because of its simplicity. In its simplest form, the Dobsonian mount consists of a box which allows the optical tube assembly to pivot in altitude, while the box itself is swivelled on a base in azimuth.

The Dobsonian mount usually relies on the friction between the side bearings on the optical tube of the telescope and a frictional material on the saddle to hold the optical tube in place. If there is too much friction, the telescope is difficult to move to center an object in the filed of view. If there is too little friction, the telescope will not sty where it is positioned. This makes stabilizing the optical tube of the telescope difficult when using a Dobsonian mount, especially when accessories, such as a finderscope or an eyepiece, are added to the optical tube. As long as the amount of friction is at an appropriate level, and therefore stabilization of the optical tube is achieved, the telescope can remain in its desired position to view an object and maintain its position even when the mount is rotated.

The devices for stabilizing a telescope on the Dobsonian mount currently available include: a sliceable weight to counter balance the weight of the telescope, a friction lock that must be adjusted to inhibit movement of the telescope, and a spring attached between the telescope tube and mount to aid in stabilization.

These devices are inconvenient to use because they do not provide a simple and user-friendly way to adjust the friction. The objective of the saxon Tension Control Handle invention is to provide a tension adjuster that users can easily turn to add or reduce tension, thereby increasing or decreasing the friction between the optical tube and the sideboard of the mount.

By providing such a tension adjuster, the telescope does not need to be balanced in order to stay in position. The tension adjuster can be tightened such that the optical tube can stay in a position but can still be moved when prompted to adjust the position of the optical tube. Alternatively, the tension adjuster can be completely tightened to lock the optical tube in position.

• Lunt 7.2 mm – 21.5mm Zoom Telescope Eyepiece
• Lunt flat-field eyepieces are coated with 0.1% anti-reflective coatings – the same coatings we use on our etalons!
• Use these eyepieces for nighttime as well as when viewing the Sun.
• 1.25″ barrel.

Zoom Telescope Eyepiece

General Features:

• Lunt flat-field zoom telescope eyepiece is coated with 0.1% anti-reflective coatings – the same coatings we use on our etalons!
• Use these eyepieces for nighttime as well as when viewing the Sun.
• 1.25″ barrel.

Lunt 7.2 mm – 21.5mm Telescope Eyepiece

• Focal length: 7.2 mm – 21.5 mm
• Barrel size: 1.25″
• Diameter: 47 mm
• Height: 82 mm
• Eye relief: 15 mm
• Lenses / Groups: 7 lenses / 4 Groups
• Field of View: 7.2 mm – 53° – 21.5 mm – 40°

Zoom Telescope Eyepiece

General Features:

• Lunt flat-field zoom telescope eyepiece is coated with 0.1% anti-reflective coatings – the same coatings we use on our etalons!
• Use these eyepieces for nighttime as well as when viewing the Sun.
• 1.25″ barrel.

Lunt 7.2 mm – 21.5mm Telescope Eyepiece

• Focal length: 7.2 mm – 21.5 mm
• Barrel size: 1.25″
• Diameter: 47 mm
• Height: 82 mm
• Eye relief: 15 mm
• Lenses / Groups: 7 lenses / 4 Groups
• Field of View: 7.2 mm – 53° – 21.5 mm – 40°

iOptron HEM44A Mount Head iPolar! Freedom from cumbersome counterweights and shaft is here!

Introducing the HEM44A Mount Head iOptron’s latest revolutionary hybrid strain wave drive mounts These light weight, compact, medium payload titans will deliver an astronomy experience like never before. Imagine a mount head weighing in at 6.2kg with a payload capability 20kg, without needing a cumbersome counterweight or shaft. Applying iOptron’s multi-decade experience creating precision mounts, the HEM44A Mount Head iPolar brings this vision to reality.

Utilizing state of the art strain wave drive technology for the RA movement in tandem with backlash-free DEC worm/belt drive design, the HEM44A Mount Head iPolar deliver unparalleled weight to payload efficiency. Its black anodized all metal CNC machined body is not only appealing to the eye, it’s a rugged platform that will perform at the highest level for many years to come. Unique features such as an electronic friction break and power down memory allow the mount safely stop and resume a GoTo slew or continue tracking even after an abrupt power loss (No need to realign and start from the beginning).

A HEM44A Mount Head can be controlled by a computer, either via ASCOM/Commander for a Windows PC or a third party INDI driver for a MacOS software; a SmartPhone/Tablet via iOptron Commander Lite or an App like SkySafari; or a Raspberry Pi device via INDI driver.

HEM44 mounts with low latitude range (0~22 degree) are available via special order.

More Information on iOptron HEM mounts

HEM44A Mount Head iPolar Features

• Advanced strain wave drive technology
• Payload capacity of 20 kg (44 lbs) with the mount weight of 6.2 kg (13.65 lbs)
• CNC machined
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• 270 second gear period
• Permanent periodic error correction (PPEC)
• Go2Nova® hand controller with ~212,000 object database
• iPolar electronic polar scope for easy and accurate polar alignment
• Cable management system, no hanging exterior cables to moving parts
• Dual saddle (Vixen and Losmandy-D styles)
• Built in zero position search and locator
• Power down position and location memory
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi (via hand controller)
• USB port for firmware upgrade and computer control
• Soft carrying case
• Two year warranty
• Tripod Not included

HEM44A Mount Head iPolar Specifications

* 200mm, with payload center of gravity to the RA rotation axis. Or an OTA size of ~220mm.

SKU: H442A

You might also like these accessories ...

iOptron HEM44EC Mount Head! Freedom from cumbersome counterweights and shaft is here!

Introducing the HEM44EC, iOptron’s latest revolutionary hybrid strain wave drive mounts. These lightweight, compact, medium payload titans will deliver an astronomy experience like never before. Imagine a mount head weighing in at 6.2kg with a payload capability 20kg, without needing a cumbersome counterweight or shaft. Applying iOptron’s multi-decade experience creating precision mounts, the HEM44 EC Mount Head brings this vision to reality.

Utilizing state-of-the-art strain wave drive technology for the RA movement in tandem with backlash-free DEC worm/belt drive design, the HEM44 EC Mount Heade delivers unparalleled weight to payload efficiency. It's black anodized all metal CNC machined body is not only appealing to the eye, it’s a rugged platform that will perform at the highest level for many years to come. Unique features such as an electronic friction break and power down memory allow the mount safely stop and resume a GoTo slew or continue tracking even after an abrupt power loss (No need to realign and start from the beginning).

A HEM44 EC Mount Head can be controlled by a computer, either via ASCOM/Commander for a Windows PC or a third party INDI driver for a MacOS software; a SmartPhone/Tablet via iOptron Commander Lite or an App like SkySafari; or a Raspberry Pi device via INDI driver.

The HEM44EC features a high precision RA axis encoder that delivers incredible tracking accuracy, enough that many will choose to image “sans” guiding.

HEM44 mounts with low latitude range (0~22 degree) are available via special order.

More Information on iOptron HEM mounts

iOptron HEM44 EC Mount Head Features

• Advanced strain wave drive technology
• Payload capacity of 20 kg (44 lbs) with the mount weight of 6.2 kg (13.65 lbs)
• CNC machined
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• 270 second gear period
• High precision encoder with realtime PEC (RPEC)
• Go2Nova® hand controller with ~212,000 object database
• iPolar electronic polar scope for easy and accurate polar alignment
• Cable management system, no hanging exterior cables to moving parts
• Dual saddle (Vixen and Losmandy-D styles)
• Built in zero position search and locator
• Power down position and location memory
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi (via hand controller)
• USB port for firmware upgrade and computer control
• Soft carrying case
• Two year warranty
• Tripod Not included

iOptron HEM44 EC Mount Head Specifications

* 200mm, with payload center of gravity to the RA rotation axis. Or an OTA size of ~220mm.

SKU: H444A

You might also like these accessories ...

The perfect case for the objective module of your ATX/STX 85mm spotting scope. The close-fitting stay-on case protects the scope against impact even in demanding conditions.

Wave 100i Mount Features:

• Working Mode: EQ or AZ
• Dual saddle capability.
• Mount weight: 4.3kg
• Payload without Counterweight: 10kg
• Payload with Counterweight: 15kg
• Transmission Mode: Stepper motor + belt drive and harmonic reducer
• RA Harmonic spec: 17-100
• DEC Harmonic spec: 14-100
• Total transmission ratio: 300:1
• Latitude adjustment range: continuously adjustable from 0 to 90 degrees
• RA has a clutch-locking function, easy to adjust balance when installing a counterweight
• Wifi and Bluetooth function
• Working power: 12v DC
• Standby current: 0.4
• Go-to current: 2A
• Highest rate: 2400x (10 degrees/s)
• RA has power-off braking function
• RA and DEC home limits position function
• Cable management function
• Red LED lighting for latitude scales and bubble level

Benefits of Strainwave Designs
The Sky-Watcher 100i is a strain wave design, commonly referred to as a harmonic drive. These types of mount mechanics come packed with a number of advantages for astrophotography, including very accurate precision tracking which is ideal for longer exposure imaging, zero backlash and smoother motion for stable tracking, compact designs for easier transport and a relatively high payload to weight ratio to accommodate a much wider range of equipment.

10kg Payload Capacity
The Sky-Watcher Wave 100i weighs only 4.3kg, yet it can handle a payload capacity of 10kg without counterweights and up to 15kg with a counterweight.

Tripod

There's a number of tripod options for the Sky-Watcher Wave 100i mount. We highly recommend the Benro Fibre Mach3 Tripod - this $549 tripod is lightweight and very stable.

Transmission R>Tatio of 300:1 Ensures Smooth Slewing and Tracking
The Wave 100i has a transmission ratio of 300:1, resulting in a high level of tracking and slewing accuracy since motor torque and rotation is divided into smaller increments, lessening any impact of jolts between rotations that could be apparent the longer exposures become. The maximum slew rate of the 100i is 2400x (10° per second).

Works at any Latitude
The Sky-Watcher Wave 100i has a working latitude range of 0° to 90°, meaning it can be operated successfully at any latitude and doesn’t suffer from limitations on more traditional gear mounts with counterweight obstruction and zenith out of range.

Supports Multiple Tracking
The Wave 100i supports sidereal, lunar and solar tracking. This means it can be reliably used for night-time astrophotography, moon capture and stunning solar imaging!

SynScan Features:

• Database with 42,900+ objects
• Messier, Caldwell, NGC, IC & SAO catalogues, Named Stars, Double Stars, Variable Stars, Named Stars
• One, Two and Three Stars or Brightest Star Alignment
• Autoguiding feature for astrophotography
• Pointing Accuracy Enhancement feature (PAE)
• Permanent Periodic Error Correction (PPEC)
• Unknown Object Identification feature
• Pointing accuracy up to 10 arc min
• Tracking rates: Sidereal, Lunar, Solar
• Slewing speeds: 1x, 2x, 16x, 32x, 64x, 128x, 400x, 500x, 600x, 800x (3.4°/sec)

The exceptional SynScan Go-To system allows full control of both R.A. and Dec. axes with 9 slew speeds and 5 arcminute pointing precision, allowing you to quickly and accurately locate objects across the night sky. The Go-To system can automatically slew the telescope on command toward planets, stars, nebulae, galaxies, clusters and much more. The SynScan has 42,900 memorised celestial objects for an amazing journey in the night sky. The Deep Sky Tour function suggests a list of the most interesting deep sky objects currently visible, so even the novice astronomer can easily observe faint objects at the touch of a button.

Kowa Prominar XD Lenses
Kowa's XD Lenses (eXtra-low) dispersion glass with similar characteristics to fluorite crystal) combines with a special dispersion concave lens to reduce a very high percentage of chromatic aberration for the ultimate viewing experience.

Schmidt-Pechan Roof Prism Lens and C3 Coating
Kowa's roof prism binoculars use a Schmidt-Pechan prism. With the highly reflective C3 coating application, this increases reflectivity by 99% or higher reflectance rate across the entire visible spectrum (400-700nm). This not only provides bright and sharp images, but also accurate color reproduction.

Thixomolded Magnesium Alloy Body
A magnesium alloy body is formed using a sophisticated thixomolding technology to deliver the benefits of a high strength metal body but in a lightweight magnesium alloy structure. The durability and reliability of these binoculars can withstand the most severe conditions to provide users the greatest degree of confidence and security.

Kowa's KR Coating
Kowa's KR coating protects the lenses from dirt and other foreign residues that may affix to the lenses during normal use. Fingerprints or oil can easily be removed with the proper lens cleaning techniques.

All-Surface Multi-Coating
The all-surface multi-coated optical system provides a precise color definition for a brighter and sharper image.

Waterproof and Fogproof
The housing is waterproof to JIS Protection Class 7 and filled with dry nitrogen gas to prevent internal fogging to ensure image clarity.

Twist-Up Eyecups
Twist-up multi-step eyecups allow customization for easy viewing even when wearing eyeglasses.

Specifications