Optec
Optec Gemini Focuser Rotator
$5,799.00
Optec Gemini Focuser Rotator
Temperature Compensation:
Like all Optec focuser products, Gemini includes a remote temperature probe for automatic temperature compensation. Simply attach the temperature probe anywhere in the linear response zone of your OTA (usually the tube or truss assembly) and Gemini will automatically keep the camera package in sharp focus. The Gemini Commander software provides a convenient wizard to help determine your telescope's TC or temperature coefficient.
Robust Compact Design
To maintain a flat, rigid base for heavy camera packages, Gemini's shell consists of two parallel plates machined from MIC-6 tool plate providing flatness within 0.001" (25 microns). Seven precise stand-off spacers maintain the 2.25" separation of these plates. The rotating drawtube is moved linearly with 1/2" of total travel using a premium timing belt driven by a high torque stepper motor. The entire package is accented with a beautiful carbon fiber wrap. Dual RJ45 connectors provide connection to the Gemini Control hub. The independent rotating drawtube is supported by a custom X-cage bearing system supported by large, 6mm chrome ball bearings.
Support for Multiple Telescopes
Featuring identical OPTEC-4300 mechanical interfaces front and back, the Gemini can be easily fitted to most any large telescope OTA. Recessed oval point setscrews provide three-point direct contact with the heavy wall OPTEC-4300 dovetail mount. Gemini's clear aperture of 3.75" is maintained through each adapter, passing even large light cones through to the camera image plane without vignetting.
On the camera side, a typical configuration might include a 4300 receiver for the Optec-DSI 3.5 High Performance spacer sets configurable to 1/4" increments when additional spacing is needed.
Currently designed telescope adapters include support for the AG Optical iDK's, Ceravolo Optical Systems Astrographs, Meade and Celestron 10-inch and larger class SCT, and Plane Wave Secure-Fit.
Multiple Ways to Connect:
The Gemini Control hub acts as the central controller to link both focuser and rotator to any control PC. The hub includes communication ports for Serial and USB (using Optec's USB/Serial cable) and wired Ethernet Network protocols as standard. An optional WiFi board and antenna can be added and installed at any time. Focuser and Rotator ports are available at the top of the Gemini hub with 12VDC Power, Network, optional Hand Control, and Serial connection ports available at the bottom.
Multiple Options Available:
Each Gemini package comes complete with everything needed to connect. An optional Hand Control allows manual access while at the telescope. WiFi add-on board mounting plate, precision external temperature probe, and motor-specific cables round out a complete integrated package.
Specifications for Gemini and Controller:
Focusing Rotator Physical Specifications:
- Clear Aperture: 3.75" (95mm)
- Back-Focus Usage: 2.2" to 2.7" (55.9 to 68.6mm)
- Focuser Travel: 0.5" (12.7mm)
- Focuser Resolution: 0.11 microns per step
- Rotator Resolution: 600 steps per degree
- Minimum Overall Thickness: 2.2" (55.9mm)
- Dimensions: 9.4" x 7.4" (239mm x 187mm)
- Weight: 6 lb. 6 oz. (2.9 kg)
Gemini Controller Hub Specifications:
Controller Hub Specifications:
- Length: 5.1" (130mm)
- Width: 3.2" (81mm)
- Height: 1.0" (27mm)
- Weight: 10 oz. (285 g)
- Mounting Holes: Four 4-40 x 1/8" depth (reverse side)
- Case Material: 6061 aluminum, anodized black.
Gemini Hub Port Connections:
- Focuser: RJ45 socket for standard Cat-5e/Cat-6 cable to Focuser port,
- Rotator: RJ45 socket for standard Cat-5e/Cat-6 cable to Rotator port,
- Power: 12VDC input, 2.5 x 5.5mm plug, center pin positive,
- Network: Standard RJ45 Ethernet socket,
- Hand Controller: RJ22 socket for standard telephone handset cord,
- Serial: RJ12 socket for Optec USB/Serial cable (included),
- Wireless: 802.11 WiFi option (coming soon).
WANT TO KNOW MORE ABOUT THIS PRODUCT?
Let ChatGPT, Claude, or Perplexity help you. Click a button and ask away.
Optec Gemini Focuser Rotator
Temperature Compensation:
Like all Optec focuser products, Gemini includes a remote temperature probe for automatic temperature compensation. Simply attach the temperature probe anywhere in the linear response zone of your OTA (usually the tube or truss assembly) and Gemini will automatically keep the camera package in sharp focus. The Gemini Commander software provides a convenient wizard to help determine your telescope's TC or temperature coefficient.
Robust Compact Design
To maintain a flat, rigid base for heavy camera packages, Gemini's shell consists of two parallel plates machined from MIC-6 tool plate providing flatness within 0.001" (25 microns). Seven precise stand-off spacers maintain the 2.25" separation of these plates. The rotating drawtube is moved linearly with 1/2" of total travel using a premium timing belt driven by a high torque stepper motor. The entire package is accented with a beautiful carbon fiber wrap. Dual RJ45 connectors provide connection to the Gemini Control hub. The independent rotating drawtube is supported by a custom X-cage bearing system supported by large, 6mm chrome ball bearings.
Support for Multiple Telescopes
Featuring identical OPTEC-4300 mechanical interfaces front and back, the Gemini can be easily fitted to most any large telescope OTA. Recessed oval point setscrews provide three-point direct contact with the heavy wall OPTEC-4300 dovetail mount. Gemini's clear aperture of 3.75" is maintained through each adapter, passing even large light cones through to the camera image plane without vignetting.
On the camera side, a typical configuration might include a 4300 receiver for the Optec-DSI 3.5 High Performance spacer sets configurable to 1/4" increments when additional spacing is needed.
Currently designed telescope adapters include support for the AG Optical iDK's, Ceravolo Optical Systems Astrographs, Meade and Celestron 10-inch and larger class SCT, and Plane Wave Secure-Fit.
Multiple Ways to Connect:
The Gemini Control hub acts as the central controller to link both focuser and rotator to any control PC. The hub includes communication ports for Serial and USB (using Optec's USB/Serial cable) and wired Ethernet Network protocols as standard. An optional WiFi board and antenna can be added and installed at any time. Focuser and Rotator ports are available at the top of the Gemini hub with 12VDC Power, Network, optional Hand Control, and Serial connection ports available at the bottom.
Multiple Options Available:
Each Gemini package comes complete with everything needed to connect. An optional Hand Control allows manual access while at the telescope. WiFi add-on board mounting plate, precision external temperature probe, and motor-specific cables round out a complete integrated package.
Specifications for Gemini and Controller:
Focusing Rotator Physical Specifications:
- Clear Aperture: 3.75" (95mm)
- Back-Focus Usage: 2.2" to 2.7" (55.9 to 68.6mm)
- Focuser Travel: 0.5" (12.7mm)
- Focuser Resolution: 0.11 microns per step
- Rotator Resolution: 600 steps per degree
- Minimum Overall Thickness: 2.2" (55.9mm)
- Dimensions: 9.4" x 7.4" (239mm x 187mm)
- Weight: 6 lb. 6 oz. (2.9 kg)
Gemini Controller Hub Specifications:
Controller Hub Specifications:
- Length: 5.1" (130mm)
- Width: 3.2" (81mm)
- Height: 1.0" (27mm)
- Weight: 10 oz. (285 g)
- Mounting Holes: Four 4-40 x 1/8" depth (reverse side)
- Case Material: 6061 aluminum, anodized black.
Gemini Hub Port Connections:
- Focuser: RJ45 socket for standard Cat-5e/Cat-6 cable to Focuser port,
- Rotator: RJ45 socket for standard Cat-5e/Cat-6 cable to Rotator port,
- Power: 12VDC input, 2.5 x 5.5mm plug, center pin positive,
- Network: Standard RJ45 Ethernet socket,
- Hand Controller: RJ22 socket for standard telephone handset cord,
- Serial: RJ12 socket for Optec USB/Serial cable (included),
- Wireless: 802.11 WiFi option (coming soon).
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.