As part of our most advanced range of photo tripods, the Benro (Series 2) Aluminium Mach3 Tripod TMA28A, combines classic design with advanced materials. High-performance twist locks and magnesium castings make this aluminium tripod ideal for indoor or outdoor photo shoots.

Click here for the Benro Polaris Camera Compatibility List.

A new generation of computer controlled, multi-purpose astrophotography and tracking mount lets you focus on your art.

Rapid changes in technology will see astronomy and astrophotography radically change in the next few years. Here's another glimpse into the future that BINTEL is proud to present.

(**Please note DSLR Cameras and tripods shown in these images are not included and are optional extras**)

The Benro Polaris is the World’s First Electric Tripod Head with Camera Interface Controller, Remote DSLR Preview & Configuration through WiFi/Mobile phone network.

Astrophotographers will appreciate that with the Benro Polaris, polar alignment hassles are a thing of the past. Low power consumption combined with a high capacity 11.1V 2500mAh Lithium-Ion battery means you can shoot all night.

Not just a star tracker mount

High precision brushless motors are a first for star trackers and offer micro control not just for tracking the night sky but combined with built-in DSLR control means breathtaking timelapses for landscapes, sunrises and sunsets and even satellite tracking. It's an artistic tool for both night and day photography.

Remote control

Spending time managing a mount during a long night, especially during the cooler months, can be a trial. Concentrate on your astrophotography creation and let the mount take care of itself by controlling your Polaris via Wifi or Bluetooth.

You can even send your camera and mount away to remote, dark sky location. It simply needs to be charged and levelled and you've then got total control for alignment, tracking and imaging over the normal mobile phone network from anywhere in the world.

Shooting Modes

An extensive range of shooting modes extends the abilities of Polaris while giving you full creative control. On offer are are astro photos, Sunrises or Sunsets, programmed path and times-lapses or even stack multiple photos for full depth of field.

Rugged, tough and waterproof

The Benro Polaris is waterproof and dustproof with an IPX6 rating. Polaris is made with aluminum alloy that endures severe working environments. It's the toughest, most rugged star tracker mount we've ever seen!

Heavy duty carrying capacity

At 7kg carrying capacity, the Polaris has the highest carrying capacity of any star tracker mount. Any current DSLR camera and most lens are ideal. It would also be a great match for a small refractor and a DSLR.

The mount itself is lightweight at only 1.5kg.

Ongoing software updates

The Benro Polaris is already receiving regular software updates. The mount's remote connectivity, advanced hardware including precise, high torque motors are the foundation for ongoing refinements and feature additions.

Matching Tripod

Almost any high-quality photographic tripod can be used to carry the Polaris mount. We suggest this Benro carbon fibre tripod. It's lightweight with a carrying capacity to match the Polaris.

More details here

Benro Polaris Specifications

https://www.youtube.com/watch?v=99dcmPVyZuo

New Improved from ZWO-OAG-L

ZWO-OAG-L is the latest iteration of M68 OAG with a larger prism size of 12mm x 12mm. The bigger clear aperture brings wider field of view in guiding. It is easy to use, and suitable for users who are interested in long focal length photography. To take the most advantage of it, we recommend you to match it with large format guiding cameras.

Features:

1. Lightweight and exquisite, 17.5mm thickness.

2. Prism size: 12mm x 12mm.

3. The effective light-passing aperture is 11.7mm x 8.3mm.

4. Can be used to connect the main camera and guide camera simultaneously. No guide telescope required.

5. Packaged with an M48 sensor tilt plate (5mm).

Operating Guide:

1. For guiding, OAG-L can only work with ASI Mini cameras like ASI174MM Mini, ASI290MM Mini and ASI120MM Mini.

2. Considering the large prism size, we don’t recommend you use OAG-L with telescopes whose clear aperture is smaller than M48.

3. Yet it is recommended to use with 2” EFW or 7x36mm EFW, and with APS-C cameras (ASI2600) or full frame cameras (ASI6200/2400). The large clear aperture supports full frame cameras without vignetting.

4. The major differences between ZWO-OAG-L and M68 OAG are about the prism size and the threads. ZWO-OAG-L removed the inner threads so you can directly use the screws to connect it to other equipment.

5. If the thread of your telescope side is M48, then you don’t need to remove the M48 sensor tilt plate coming with ZWO-OAG-L. On the contrary, you need to remove it and use some other sensor tilt plate at the corresponding thread of your telescope.

The pictures below show how to remove the sensor tilt plate:

OAG-L Mechanical Drawing

OAG-L & OAG-L-68 Mechanical Drawing

Connection Guide:

Please Note:

While adding ZWO-OAG-L into your optical train, please make sure the prism won’t block the camera sensor.

You can use the guiding screw to adjust the guiding camera’s focus length. Please make sure the distance from the prism to the main camera and to the guide camera are the same. To ensure the result, it is better to do this in the daytime for the adjustment will be very difficult at night.

Skywatcher does it again. An old favorite gets a complete facelift with new features and upgraded components!

The venerable Dobsonian reflector design has recently undergone some important upgrades and improvements: Skywatcher is pleased to introduce the all-new Collapsible Dobsonian complete with Crayford focuser – the ultimate in large aperture portability and performance.

This elegant truss tube design was carefully engineered to combine ease of use, extreme portability and consistent performance in an affordable package. Unlike other truss tube designs, the Skywatcher Collapsible Dobsonian does not need to be disassembled between uses. It transports as two compact pieces that can be assembled and ready to use in just seconds! It is easy to collimate once set up, and it holds its collimation throughout the evening!

The bearing system has been redesigned as well. The new Skywatcher Collapsible Dobsonians feature buttery smooth azimuth bearings. Even the twelve-inch model can be rotated with just the push of a finger. Like our traditional Dobsonians, the new Collapsible Dobsonians feature Skywatcher’s patented tension adjustment control on the altitude bearings. This eliminates the need and added cost of clumsy counterweight systems to balance the telescope.

To top it off, all of the new Collapsible Dobsonians are shipping with ultra smooth Crayford focusers.

Skywatcher 8 Inch Collapsible Dobsonian Key Specifications

The saxon 25.4mm Red Dot Finder with Bracket is a no magnification finder that, when properly aligned with your telescope, will pinpoint what you are looking at with an illuminated red dot. Unlike finderscopes red dot finders will keep the image of the sky upright and non-reversed, making the saxon 25.4mm Red Dot Finder with Bracket easy to use for amateurs and experts alike.

Will fit all dovetail mounting brackets.

ZWO ASI220MM Mini New Generation Guide Camera

ZWO ASI220MM Mini camera integrates a 1/1.8" SC2210 sensor (7.68mm x 4.32mm). It is a mono guide camera with excellent near-infrared sensitivity. This camera has 4um x 4um pixels with an array of 1920 x 1080 and a full well capacity of 8780e. The protective window is AR coated.

Instruction Manual

SKU: ASI220MINI

The Nikon TRA3 Binocular Tripod/Monopod Adapter is used to mount specific Nikon binoculars to a tripod or monopod with ¼” thread attachment. It enables more stable viewing, particularly useful when used with high-magnification binoculars.

Compatible with the following Nikon binoculars

EDG Binoculars
MONARCH 7 8x42/10x42
MONARCH series
Action series
Action zoom series
Action EX series
7x50CF WP/7x50CF WP Compass
7x50IF WP/7x50IF WP Compass
10x50CF WP

Bintel Camera Adapter 40mm 2 Inch

Spacer and camera adapter in one package.

Precision machine, Black anodised aluminium construction

T-threaded will fit all T2 threads

Specifications

Saxon 50pcs Slide Kit

Bored of studying the same bland prepared slides you got with your microscope? It might be time for you to try making your own slides. Having your own Saxon Blank Slides Kit with Box (50pcs) can open you up to a world of micro-organisms around you that you did not even think about! You will be surprised with what you find!

The Saxon 50pcs Slide Kit includes 50 high quality glass blank sides, 100 cover glass and a handy plastic case to keep your slides organised and safe.

Specifications

• Slide dimensions are 25.4mm x 76.2mm with ground edges.
• Cover slips are 18mm x 18xx with 0.15mm thickness.

The Saxon Blank Slides Kit with Box is also available in a 100-pack.

What's in the Box

• 1x saxon Blank Slides (50pcs)
• 1x saxon Cover Slips (100pcs)
• 1x saxon Slides Carry Box

Saxon - High Quality Optics

The Saxon brand commits to quality and research. The company develops a range of binoculars, telescopes, microscopes and accessories with the understanding of its user’s priorities and needs. Saxon has built each product around the knowledge that everyone’s viewing requirements are different, proven through each precise and well though out product line. Browse a range of Saxon optical products and you'll find that every glass has been designed to help every viewer see only the best in every situation.

Product Code: SAX-310050

MINI AZ-GT GTi Mount Features:

• Wi-Fi GOTO
• Sky-Watcher Freedom Find endcoders
• DC12V Voltage.
• 5kg Load Capacity.
• 1.3kg Mount Weight.
• DC Motor.
• Dimensions: 14cm x 9cm x 14cm.

Please note this is the GTi version of the mount that includes encoders on both the ALT And AZ. After initial alignment you can move the mount by hand without needing to re-align)

Please note, does not include hand controller cable.

The SkyWatcher V5 hand controller includes new features such as: Firmware-updatability via the internet, pointing accuracy enhancement (PAE) and ability to store star alignment data.

SynScan handset with USB for SkyWatcher goto Telescopes & Mounts, the latest version fully updatable via the SkyWatcher website.

Accepts GPS Mouse.

SkyWatcher V5 hand controller Specification

• Alignment Method: One-Star Alignment, Two-Star Alignment, Three-Star Alignment.
• Pointing Accuracy: Up to 1 arc min.
• Object Catalogues: Messier, IC, NGC, Caldwell.
• 13740 Object Database: Including Planets, Named Stars, Double Stars, Variable Stars & User-Defined Objects.
• Backlash compensation.
• Periodic Error Correction.
• Premium PC Interface: ASCOM compatible, Nexstar-5i compatible protocol and command set
• User-tunable LCD contrast
• LED backlight and buzzer volume.

Please not this does not include a connecting cable.

Contact us for the correct one for your mount. 

ZWO Pier 200 Pier Extension for the AM5 Mount

The NEW ZWO Pier 200 is a multi-functioning easy-to-install extension with a large load capacity.

Made of Aircraft grade Aluminium it has high-temperature resistance and is highly durable for years of trouble-free service. The weight is only 1.6kg yet it has up to 50kg load rating.

Simple Installation

Out of the box, functionality simplifies the whole installation process to just one step. Just tighten the locking knobs.

Artistic Appearance

The matte surface brings a classic colour contrast when used with the Red ZWO AM5 mount.

Wide Range of Compatibility

The ZWO Pier 200 works with other tripods. It is not only suitable for the ZWO Carbon Fibre tripod, but it can also be used with the 1.75-inch steel tripods from iOptron and Skywatcher, and with the 2-inch tripod for the Celestron Advanced VX Mount.

ZWO provides 3 optional thin pillars. You can take off the tube and install the pillars to get a more portable PE 160, which will reduce the weight of transporting your mount.

SKU: ZWO-PE200

The saxon Telescope Wi-Fi Adapter featuring:

• Alignment which include of Polar Alignment, Bright Star, One Star, Two Stars and Three Stars alignment.
• GoTo and tracking by selecting the desired object from the 42,000 object list.
• Point and Go function to simplify the process of hunting the desired object.
• 8 direction buttons to adjust your telescope to desired position.

This must have adapter is compatible with the below computerized mounts: Saxon and Sky-Watcher

• AstroSeeker/ Star Discovery
• AZ GT/ Star Explorer
• GoTo Dobsonian
• EQ3 GoTo
• EQ5 GoTo
• HEQ5 Pro
• AZ-EQ5 GT Pro
• NEQ6 Pro
• AZ-EQ6 GT Pro
• EQ8 Pro

The QHY5III462 camera uses the Sixth Generation Sony 2.1 megapixel IMX462 STARVIS CMOS sensor. The pixel size is 2.9um making it the same size and resolution as the sensor used in the QHY5III290 camera that has been so successfully used for planetary imaging by some of the best planetary imagers in the world. Like other cameras in the 5III series, the QHY5III462 is USB 3.0 powered and controlled. No additional power is required.

The IMX462 sensor is back-illuminated and incorporates new technology that gives it some significant advantage over other planetary cameras: First, the IMX462 sensor has sHCG (Super High Conversion Gain) for very low read noise at high gain. This is ideal for stacking hundreds or thousands of short planetary images. Second, it is exceptionally sensitive in the NIR.

In this latest generation of sensors, the photodiode portion of the pixel well is physically deeper than in previous Sony BSI sensors, allowing photons of longer wavelength to penetrate deeper into the substrate. This dramatically increases the sensor’s sensitivity to red and near infrared (NIR) light. The RGB filters over the pixels become transparent at NIR wavelengths, so the sensor displays almost equal peak sensitivity to NIR light as it does to light in the visible spectrum.

The peak QE in the NIR around 800nm is as high as the peak QE in the visible wavelengths. For planetary imagers using a methane filter that passes light around 880nm this is welcome news.

BSI

One benefit of the back-illuminated CMOS structure is improved sensitivity. In a typical front-illuminated sensor, photons from the target entering the photosensitive layer of the sensor must first pass through the metal wiring that is embedded just above the photosensitive layer. The wiring structure reflects some of the photons and reduces the efficiency of the sensor.

In the back- illuminated sensor the light is allowed to enter the photosensitive surface from the reverse side. In this case the sensor’s embedded wiring structure is below the photosensitive layer. As a result, more incoming photons strike the photosensitive layer and more electrons are generated and captured in the pixel well. This ratio of photon to electron production is called quantum efficiency. The higher the quantum efficiency the more efficient the sensor is at converting photons to electrons and hence the more sensitive the sensor is to capturing an image of something dim.

Extended Near Infrared Sensitivity

Logically, one would think, each generation of Exmor sensor would be built upon and incorporate all of the improvements of the generation immediately preceding. However, this was not the case with the fifth generation Exmor R sensors.

The first back-illuminated sensors used shallower pixel wells (like the third-generation front- illuminated designs) than the physically deeper pixels of the fourth generation. So, while the back- illuminated structure increased the sensitivity in the visible range by 2X, the shallower pixels did not improve the NIR. The answer to this is seen in the latest, sixth generation, Sony Exmor R sensors, like the IMX462. Using physically deeper pixels in conjunction with the back-illuminated structure has dramatically improved the sensor’s sensitivity to both the visible and near infrared wavelengths.

sHCG Mode

Another advantage of the QHY5III462 is the camera’s “Super High Conversion Gain” capability. By using a lower capacitance, a small amount of charge can be converted to a high voltage resulting in higher sensitivity in low-light conditions. The readout noise of the QHY5III462 in high gain mode is as low as 0.5 electrons!

The test exposures below demonstrate the low light improvement over the IMX290 sensor. The QHY5III462C image is on the left and the corresponding QHY5III290C image is on the right. The low light conditions and exposures are identical for each top and bottom pair of images and a UV/IR filter was in place for each camera. So this test demonstrates the QHY5III462C’s increase in sensitivity and SNR over the QHY5III290C under the same conditions in the visual light spectrum alone.

Color and Mono Imaging

The filter matrix in the IMX462 uses organic dye filters. These filters are very efficient at visible wavelengths but become completely transparent in the NIR. For this reason, good RGB color balance requires an external UV/IR filter that blocks NIR wavelengths.

Many color cameras build this UV/IR filter into the camera or optical window for normal color imaging. However, in order to fully exploit the capabilities of the 462C sensor, in the QHY5III462C camera the optical window is AR coated only with no UV or IR blocking. Instead, the QHY5III462C camera includes two 1.25″ screw-in filters, a UV/IR cut filter to isolate the visible wavelengths for normal RGB imaging and an IR850 filter that will cut the visible wavelengths but pass wavelengths above 850nm.

Specifications

Camera Curves

The largest planet in our solar system is a joy to explore with a telescope, and the Orion Jupiter Map & Observing Guide is loaded with educational information and tips to help you get the most out of each and every view of Jupiter. With its bold equatorial cloud belts and swirling storms including the famous Great Red Spot, the planet Jupiter is an ideal telescopic target for beginners and experienced stargazers alike. The Orion Jupiter Map & Observing Guide is packed with observing tips, filter recommendations for viewing and imaging Jupiter, and features beautifully detailed images of the gas giant planet. Use it along with your telescope to identify Jovian atmospheric features including belts, zones, regions, and bright and dark features using official nomenclature.

The FireFly FMT-T2 Mini Tabletop Tripod is a compact yet powerful support system designed for stability and durability. Built with reinforced lightweight aluminum along half the length of each leg, this tripod offers exceptional strength while remaining portable. With a 5kg payload capacity, it effortlessly supports cameras, smartphones, and other gear.

Featuring a simple push-button mechanism, the tripod allows quick adjustments and locks securely at two different angles, making it versatile for various shooting situations. Its low-profile design enables a minimum height of just 47mm, perfect for capturing creative low-angle shots with ease. Whether you're shooting indoors, outdoors, or on the go, the FireFly FMT-T2 ensures reliable support in a sleek, compact form.

Benro Bracket for Binoculars

Made of lightweight and strong aluminium and treated with a scratch-resistant anodized finish, the Benro Arca-Swiss Style Binocular Bracket enables you to easily mount your binoculars outfitted with a 1/4"-20 threaded socket onto a photo/video/field tripod for hands-free use. Mounting your binoculars, especially high-powered sets or those with large objective lenses, onto a tripod or monopod helps to steady the view, reduce vibrations and eliminate arm fatigue.

The base of the adapter is designed to fit directly onto Arca-Swiss-style photo/video quick release heads, which eliminates the need for additional QR plates. If you aren't planning on using a head, or your head is not an Arca-Swiss-style, the base also has both 1/4"-20 and 3/8"-16 female threads that make it compatible with just about any quick release plate, head, photo/video/field tripod, monopod, or window mount available today.

The vertical upright on the adapter is triangular with a taper toward the top which helps it fit between the binoculars' optical tubes and giving you access to the minimum interpupillary adjustment even on larger-objective models. The wider base provides the strength and stability you need for heavier field binoculars. The upright also has two female 1/4"-20 threaded holes that you can use to keep the binoculars' mount hole cover safe or if objective caps are tethered to the mount cover you can still use them by installing them into one of the adapter's holes.

Standard desktop hubs are designed for use indoors and must be powered from 120 volt or 240 volt mains electricity. For anyone requiring the use of a USB hub outdoors or in a remote situation where access to mains electricity is difficult or impossible, this device is a welcome addition.

For astro-imagers, the use of a hub at the scope helps reduce wire routing and tangling problems. We use a small heater inside to keep things nice & dry!

Features include:

USB3.0 transfer rates up to 5Gbps, 10 times faster than USB2.0
Charging hub that can recharging smart-phones/tablets that require 2.1 Amp
A small heater inside keeps plugs nice and dry!
Powered from 12 VDC.
This is an active hub.
Backwards compatible with USB2.0 /1.1
Rugged case.
Optional port dust covers. Great for use in unused ports and for storage. Keeps your ports clean and moisture free!
Includes velcro to attach to a surface of your choice.
Hubs can be ganged.

Specifications:

USB 3.0
Electrical requirement: 12 VDC.
Maximum Total aperage: 5 amps / 2.4 Amp on individual ports
Dimensions: 6.89 " x 2.95" x 0.91" (175mm X 75mm X 23mm)
Weight (without Power Cord): 5.8 oz (166 gr)
One year parts and labour warranty.

Replacement Celestron dovetail bar for the CG-5 bar.

Used if mounting your scope to a Losmandy type saddle as opposed to Vixen type.

Please note : This requires fitting so you should feel comfortable in attempting this.

Also note that this product will not work with CPC 800 GPS or CPC Deluxe 800 HD telescopes without completely removing the finder scope bracket.

The ZWO T2-T2 Extension 21mm is designed to help you to reach 55mm back focus distance

for example: attach the 21mm extender to ASI071 to reach 55mm back focus distance:17.5mm+21mm+16.5mm=55mm

SKU: ZWO-M42-M42-21mm

The Celestron 1.25inch Star Diagonal slides into the focuser (1.25”) of your refractor or catadioptric telescope and accepts standard 1.25” eyepieces, allowing you to view objects more comfortably. A diagonal that is angled at 90º helps avoid neck strain when looking through the eyepiece.

Please note that a 90º diagonal will display images that are right side up, but left to right orientation will be reversed (mirrored).

2 Years Warranty

SKU: 94115-A

The Celestron NexStar+ Hand Control - AZ is a standard accessory on all current altazimuth mounted NexStar-style telescopes, and is compatible with the Celestron SLT, LCM, SE, and CPC computerized telescopes.

With the push of a button, you can access NexStar+’s huge database of over 40,000 celestial objects. Automatically slew to objects in a variety of catalogs, including the Messier, NGC, Caldwell, and SAO brightest stars. The planets as well as a list of the most popular objects are also included. Not sure what to look at? Use the Sky Tour, and you’ll be shown a selection of the most popular objects for the time and date you are observing!

A variety of alignment procedures are pre-programmed into the NexStar Plus Hand Control, including SkyAlign, Auto 2-Star, 1-Star, 2-Star, and Solar System. You can also choose from a variety of tracking rates (sidereal, solar & lunar) and slew speeds. Slew at 1, 2, or 3 degrees per second, or choose speeds as low as 2x or as high as 64x.

This hand control includes Flash Upgradeable Technology, allowing users to upgrade its software via the Internet.

This handy accessory quickly and securely connects your binocular to a standard photographic tripod for steady views of marine life or outdoor scenery.

It will fit most roof prism binoculars including Nikon models such as:

• ACULON A211 series
• Action series
• Action zoom series
• Action EX series
• 7x50CF WP/7x50CF WP Compass/7x50CF WP GLOBAL COMPASS
• 7x50IF WP/7x50IF WP Compass
• 10x50CF WP

Losmandy DM8 Dovetail Plate

The Dovetail Plates are the heart of the Losmandy Secondary System. 0.5" x 4.0" x length of the tube assembly.

Dovetail plates may be mounted to the top and bottom of tube assembly for mounting of all D series accessories, making it possible to use both sides of tube for equipment.

The dovetail plates, like all accessories in the Losmandy line, are machined for lightness and rigidity from aluminium stock, then black anodized for a tough, corrosion free surface.

Meade dovetail plate for 8", bolts to existing holes.

Includes curved blocks for precision fit to the tube assembly.

Weight: 2 lbs.
Length: 13.5"
Hole Separation: 12.325/12.70,
Height: top of tube to top of dovetail plate 1.00"
Thickness: .5"

Part #: DM8

NOTE THIS IS THE CAP for 2" accessories, eyepieces only

A simple plastic cover designed to keep dust out 2" accessories. This includes all standard barlows, diagonals, focusers, eyepieces, etc. Perfect to replace the factory plugs you may have misplaced since buying your telescope.

Use a dust cap to cover the front end of your eyepieces and barlows by capping it on top of the lens.

Use a dust plug to cover the back end of your accessories by plugging it inside the optical tube.

The Bintel Projection lenses in 32mm and 40mm focal lengths are useful if you can't get your telescope to reach focus with a conventional camepter and T-ring.
Many Newtonian telescopes don't have enough focuser in-travel with a DSLR cam - the Bintel Projection lenses provide a solution.

The top of the eypiece housing unscrews(T2 thread) allowing a T-ring to attach directly.

With the same fine optics as Bintel's Plossl range it also makes a great low power eyepiece!

You know what they say about people who assume you can't get HD optics, rugged performance and high end form-factor in a value-price binocular? They clearly haven't checked out the Vortex Crossfire HD 8x42. Add in the included GlassPakTM binocular harness for quick optic deployment in the field and superior protection and comfort - The Crossfire® HD truly is a rare find.

OPTICAL FEATURES

Vortex Crossfire HD 8x42 Optical System Optimized with select glass elements to deliver exceptional resolution, cut chromatic aberration and provide outstanding color fidelity, edge-to-edge sharpness and light transmission.

Fully Multi-Coated Increase light transmission with multiple anti-reflective coatings on all air-to-glass surfaces.

CONSTRUCTION FEATURES

Rubber Armor Provides a secure, non-slip grip, and durable external protection.

Waterproof O-ring seals prevent moisture, dust and debris from penetrating the binocular for reliable performance in all environments.

Shockproof Rugged construction withstands recoil and impact.

Fogproof Nitrogen gas purging prevents internal fogging over a wide range of temperatures.

Roof Prism Valued for greater durability and a more compact size.

CONVENIENCE FEATURES

Adjustable Eyecups Twist up and down for comfortable viewing with or without eyeglasses.

Center Focus Wheel Adjusts the focus of both binocular barrels at the same time.

Diopter Adjusts for differences in a user's eyes. Located on right eyepiece.

Tripod Adaptable Compatible with a tripod adapter, allowing use on a tripod or car window mount.

Specifications

Warranty

All Vortex products are covered by the Australian Vortex VIP Warranty

Our warranty is about you, not us. It's about taking care of you after the sale.

The VIP stands for a Very Important Promise to you, our customers. We will repair or replace your Vortex product in the event it becomes damaged or defective—at no charge to you other then return post from you to us. It doesn't matter how it happened, whose fault it was, or where you purchased it. You can count on the VIP Warranty for all riflescopes, red dots, rangefinders, binoculars, spotting scopes and monoculars.

• Unlimited Lifetime Warranty
• Fully transferable
• No warranty card to fill out
• No receipt needed to hang on to

If you ever have a problem, no matter the cause, we promise to take care of you.

The VIP warranty does not cover loss, misuse, theft or deliberate damage to the product.