Welcome to The Binocular and Telescope Shop
Main menu
-
Telescopes
- Telescopes
-
Celestron Telescope
-
Smart Telescopes
-
Saxon Telescopes
-
Skywatcher Telescopes
-
TeleVue Telescopes
-
Planewave Telescopes
-
Vixen Telescopes
-
TEC Telescopes
-
BORG Telescopes
-
Founder Optics
-
Solar Astronomy
-
Binoculars
- Binoculars
-
Types of Binoculars
-
Vortex Binoculars
-
Nikon Binoculars
-
Swarovski Binoculars
-
Leica Binoculars
-
ZEISS Binoculars
-
Fujinon Binoculars
-
Gerber Binoculars
-
Vixen Binoculars
-
Pentax Binoculars
-
Olympus Binoculars
-
Kite Optics
-
Kowa Binoculars
-
GPO Binoculars
-
Zerotech Binoculars
-
Binocular Accessories
-
Spotting Scopes
- Spotting Scopes
-
ZEISS Spotting Scopes
-
Swarovski Spotting Scopes
-
Leica Spotting Scopes
-
Nikon Spotting Scopes
-
Vortex Spotting Scopes
-
Kowa Spotting Scopes
-
Pentax Spotting Scopes
-
Celestron Spotting Scopes
-
Spotting Scope Accessories
-
Microscopes
- Microscopes
-
Beaver Labs Microscopes
-
Celestron Microscopes
-
Digital Microscopes
-
Microscopes for Children
-
Biological Microscopes
-
Mounts & Tripods
- Mounts & Tripods
-
ZWO Mounts
-
Celestron EQ Mounts
-
iOptron Mounts
-
Vixen Mounts
-
Paramount EQ Mount
-
Saxon Mounts
-
PlaneWave Mounts
-
Skywatcher EQ Mounts
-
Losmandy EQ Mounts
-
Camera Tripods
-
Astro Star Tracker Mounts
-
Mount Accessories
-
Imaging
- Imaging
-
ZWO Cameras
-
QHY Cameras
-
Starlight Xpress
-
FLI Cameras
-
Atik Cameras
-
Pegasus Astro
-
Camera Lenses
-
SBIG Cameras
-
Focusing
-
Imaging Accessories
-
Filters (Imaging)
-
Autoguiding
-
Accessories
- Accessories
-
Eyepieces, Diagonals and Barlows
-
Adapters & Extensions
-
Books & Sky Guides
-
Bags, Cases & Covers
-
Cleaning and Maintanence
-
Collimation
-
Dew Control
-
Dovetail Bars & Plates
-
Filters (Visual)
-
Finderscopes
-
Tube Rings
-
Tele Vue Eyepieces
-
Bintel Eyepieces
-
Celestron Eyepieces
-
Vixen Eyepieces
-
Barlows & Powermates
-
Saxon Eyepieces
-
Eyepiece Kits
-
Diagonals
-
Tools
Your cart
Choose your Location
-
Bintel Glebe
Usually ready for pickup in 24 hours
Bintel 84 Wentworth park road, Glebe, 2073, NSW
Phone:(02) 9518 7255
Hours:
Monday9:30 am–5:30 pm
Tuesday9:30 am–5:30 pm
Wednesday9:30 am–5:30 pm
Thursday9:30 am–5:30 pm
Friday9:30 am–5:30 pm
Saturday9:30 am–4 pm
SundayClosed
Email subscriber Discount collection
1788 products
1788 products
Sort by:
- 特色
- 最相关
- 畅销
- 按字母顺序排序,A-Z
- 按字母顺序排序,Z-A
- 价格,从低到高
- 价格,从高到低
- 日期,从旧到新
- 日期,从新到旧
$1,790.00
The Lunt Solar Systems Pressure Tuner Controller, or PC-USB, is a microprocessor controlled, remote operable* , pressure control system that can be retrofitted to any Lunt PT product without return to the Lunt facility. A simple 1/8″ airline connects the PC-USB to the Solar Telescope and can be installed at any length.
The PC-USB is a simple 2 button system. One button for increasing and one button for decreasing the PT pressure. Digital feedback and indicator lights are provided.
The PC-USB can run continuously on internal battery power for more than 12 hours. It has external power input (12-15 VDC) (120/240 VAC to 12 V adapter) that can power the unit and charge the internal batteries simultaneously.
All existing PT systems can be retrofitted via an adapter to the pressure tuner knob. Or, future PT units can be specified with a quick disconnect at the PT input, removing the PT knob from the telescope altogether.
Upon power up the PC-USB will go thru a systems vent and ambient pressure set mode. It can be factory or user programmed to center wavelength setpoint. Due to the sealed nature of the system, the center wavelength setpoint will remain constant at any altitude at a given set pressure point.
The Pressure Tuner Controller is accurate to 0.3 PSI, providing very precise control of the pressure setpoint. It will auto-compensate for fluctuations in internal pressure changes due to significant changes in temperature. Because the PC-USB can provide closed-loop feedback of internal etalon pressure, users can correlate change in pressure to doppler shifted events.
Contact us if you need additional hose length.
* USB Cables for remote usage not included
$799.00
Well suited to bird watching!
Designed for long-range clarity, the ZeroTech TRACE 8x45 delivers best-in-class brightness, resolution, and sharpness. Built with Abbe-Koenig prisms and a high-quality ED objective lens, the TRACE 10x45 offers over 90% light transmission for remarkable low-light performance and vibrant true-to-life colour.
The widest field of view in the ZeroTech range makes these binoculars your ideal companion for viewing wildlife, bird watching or even spending a clear night observing star clouds in the Milky Way, the TRACE 8x45 delivers a wider field of view and brighter image than traditional 8x42 and 8x50 binoculars—without the extra bulk or cost.
Built to endure the harshest conditions and backed by ZeroTech’s lifetime warranty, this is your optic for life.
Key features:
- 8x45 Magnification – Perfect for general field use with a wide, immersive view
- ED Objective Lens – Reduces chromatic aberration for lifelike colour and crisp detail
- Abbe-Koenig Prisms – Premium prism system for superior brightness and image contrast
- 90%+ Light Transmission – Exceptional low-light performance for dawn and dusk viewing
- Edge-to-Edge Sharpness – Delivers clarity from the centre to the outer rim of the image
- Waterproof & Fog-Proof – Nitrogen-purged and sealed for all-weather reliability
- Unconditional Lifetime Warranty – Confidence for life, no questions asked
Specifications:
| Power | 8x Magnification |
| Objective Lens Diameter | 45mm ED |
| Type Of Prism | Abbe |
| Exit Pupil Diameter | 4.54mm |
| Eye Relief | 14.3mm |
| Field Of View | 6.4° 112m@1000metres |
| Minimum Focus Distance | 2.5m |
| Interpupillary Adjustment Range | 57–75mm |
| Waterproof | Yes |
| Optical Length | 152.66mm |
| Eyepiece Diameter | 24mm |
| Light Transmission | 90% |
| Number Of Lens | 9pcs/7groups |
| Prism Coating | Phase & Dielectric |
| Lens Coating | FBMC |
| Weight | 930g |
| Resolution | 3.88″ |
| Dimensions | 139x55x164mm |
| Box Dimensions | 265x80x250mm |
| Tripod Supported | Yes |
What's in the Box:
- 8x45 Trace Binoculars
- Protective binocular EVA case
- ZeroTech neck strap
- High Quality Microfibre Cloth
From $2,390.00
The Lunt 50mm Dedicated Hydrogen-Alpha Solar Telescope is purpose-built for solar observation, offering an accessible entry point into this specialized field. Equipped with a Pressure Tuner for precise wavelength adjustment, this instrument delivers crisp views of the Sun's chromosphere, prominences, and surface features. The pressure-tuning mechanism provides superior control compared to traditional tilt methods, enabling consistent fine-tuning without mechanical drift. Ideal for amateur astronomers and serious hobbyists, this telescope combines optical quality with practical functionality. The 50mm aperture gathers sufficient light for detailed solar disk observation and basic research-level study of solar activity.
Lunt Dedicated Solar Telescopes deliver professional-grade solar observation in instruments designed specifically for the Sun. These scopes reveal chromospheric details with remarkable clarity, capturing prominences, filaments, and surface features that cannot be seen with standard white light filters. Compact, precise, and optically excellent, they offer an immersive solar observing experience for both beginners and experienced enthusiasts.
Selecting the correct blocking filter ensures optimal field coverage with your Lunt 50mm solar telescope. B400 is ideal for most visual observing, B600 works well for visual use with wider eyepieces and some imaging with a small sensor camera.
Specifications:
- Telescope Type: Dedicated H-alpha
- Aperture: 50 mm
- Objective Type: Custom Doublet Optimized at 656 nm
- Objective Coating: Ion Assist Ultra-Narrowband AR (656 nm)
- Focal Ratio: F/7
- Focal Length: 350 mm
- Mounting: CNC Clamshell and Vixen Style Dovetail
- Storage: Box with Fitted Foam, Hard Case Optional
- H-alpha Etalon Type: Internal Dedicated
- Etalon Wavelength: 656.28 nm
- Etalon Bandpass: <0.7 Å Single Stack, <0.5 Å Double Stack
- Etalon Material: UV Grade Fused Silica
- Etalon Tuning: Doppler True Barometric Pressure Tuning
- Doppler Shifting: Instant
- Blocking Filter Bandpass: 6 Å
- Sun Finder: TeleVue Sol Searcher compatible
$129.95
GPO Bino Harness PRO
The GPO Bino Harness PRO boasts an ultra-durable 1680D Nylon Ballistic Fabric outer shell, ensuring protection against scratch while maintaining comfort during wear. Its padded interior housing safeguards your binoculars, offering various options for carrying accompanying accessories, enabling you to focus entirely on your outdoor activities.
The GPO Harness with chest pocket eliminates uncontrolled dangling of your binoculars, allowing undistracted engagement in outdoor pursuits. Carefully positioned additional pouches and pockets cater to your extra accessories, while the resilient fabric shields your optics from wind and weather. Moreover, the shoulder strap can be easily adjusted to accommodate different body sizes.
Among our accessory extensions, the GPO Bino Harness PRO stands out as the ideal companion for your binoculars. Engineered to keep the pocket close to your chest, minimising movement in your optics, it is constructed using tough fabric, making it resilient and well-suited for bird watching, hiking, hunting and all environment. The design includes a lens cloth, and its one-handed opening mechanism ensures quick and effortless access.
Key features
- Bino Harness Pro stays secure to chest during movement
- 1680D Nylon Ballistic Fabric outer shell for extra durability
- Front U-shape design allows for easier access to binoculars
- Padded interior
- Padded back panel for added comfort
- Non-metallic binocular attachment straps
- Two lashing points for extra accessories
- One side pocket for accessories such as indicator
- Molle system for extra accessories
- Microfibre lens cloth included
- Adjustable attaching harness to fit all body sizes
What’s in the box?
- 1 x Bino Harness Pro
- 1 x Microfibre lens cloth
$899.95
GPO PASSION™ ED 10×42 Binoculars
Looking for the best binoculars for hunting and birdwatching? Look no further than the GPO PASSION™ ED 10×42 Binoculars. These high-quality observation optics are the perfect choice for outdoor enthusiasts, offering an unbeatable price-performance ratio.
Crafted from top-quality materials, including magnesium housing, these binoculars are lightweight without compromising image quality. The ED lenses, multi-coatings, and matched optics ensure a wide field of view, high edge-to-edge sharpness, and excellent transmission values, while the 2m close focus and 16mm long eye relief provide comfortable observation for extended periods of time.
Ideal for birdwatching and hunting in Australia, New Zealand, and other outdoor environments, these binoculars are also waterproof and fog proof, making them suitable for use in any weather condition. And with their ergonomic design and magnesium body and hinge, they’re as comfortable to hold as they are functional.
Whether you’re a seasoned hunter or a passionate birdwatcher, the GPO PASSION™ ED 10×42 Binoculars are the perfect tool for enhancing your outdoor experience. With their wide field of view, high edge-to-edge sharpness, and unbeatable price-performance ratio, you won’t find a better set of binoculars in this price range.
Accessories Included
Instruction manual, cleaning cloth, hard case, neoprene neck strap, hard case strap, objective covers, ocular covers.
Technical Specifications
| Prism type: | Schmidt-Pechan | |
| Magnification: | 10x | |
| Objective diameter (mm): | Effective diameter | 42 |
| Ocular diameter (mm): | Effective diameter | 21.1 |
| Field of view (FOV) m at 1000m: | 114 | |
| Exit pupil diameter (mm): | Measurement of the pupillary ocular beam | 4.2 |
| Eye Relief (mm): | From the last optical surface | 16 |
| Housing: | Main body and hinge | Magnesium |
| Close focus (meters): | Shortest focal distance | 2 |
| Interpupillary Distance (IPD): | Center pupil to centre pupil measurement | 56-75 |
| Dioptric compensation range: | -2.5, +2.5 | |
| Waterproof: | Mbars / cm | 100 |
| Transmission Daylight: | ISO 14490-5:2005 | 90% |
| Height (mm): | Without covers | 55 |
| Length (mm): | At outside diameter | 138 |
| Width (mm): | Fully extended | 127 |
| Weight (grams): | Without covers | 725 |
Warranty
GPO is committed to delivering quality products that are built to the highest standards. Our warranty ensures that every GPO product is reliable and performs optimally. We offer a limited lifetime warranty against defects in materials or workmanship on the mechanics and optics, and 2 years on electronic components of our products purchased from an authorised Australian dealer. Please note that our warranty does not extend to products that have been subjected to abuse, misuse, improper handling, physical damage, improper repairs or modifications. The warranty does not cover damage caused by natural disasters and normal wear and tear. Further claims for consequential damage that has not occurred to the product itself will not be accepted. This warranty is applicable only to products sold as new.
In the event of a warranty claim, the purchaser must provide the tax invoice and/or delivery receipt, as well as the product warranty card, which shows the serial number of the product and the date of purchase. These documents serve as proof of authenticity for the purchased product and as evidence of entitlement to the warranty. The purchaser can make a warranty claim through one of our authorised dealers or contact us directly for further instructions on how to process the claim. We will determine whether to repair or replace the product or the defective component at our discretion.
This warranty is in addition to any other rights or remedies that the purchaser may have under the Australian Consumer Law and does not limit or exclude those rights or remedies. The terms and conditions of the warranty are governed by the laws of Australia, and any disputes will be resolved in accordance with Australian law.
$449.00
The Crossfire® HD family of spotting scopes offers powerful, high-performance optics backed by the proven reliability of the Crossfire® line. With a wide field of view, it's ideal for scanning large areas in a variety of environments. The Arca-Swiss compatible foot provides easy, out-of-the-box mounting on most tripods. Available in a range of magnification options, the Crossfire® HD is a versatile tool—perfect whether you're just getting started or looking for a long-term upgrade.
HD Optical System
Optimized with select glass elements to deliver exceptional resolution, cut chromatic aberration, and provide outstanding color fidelity, edge-to-edge sharpness, and light transmission.
Fully Multi-Coated Lenses
Anti-reflective coatings on all air-to-glass surfaces provide increased light transmission for greater clarity and low-light performance.
FULL FEATURES
| HD Optical System | Optimized with select glass elements to deliver exceptional resolution, cut chromatic aberration and provide outstanding color fidelity, edge-to-edge sharpness, and light transmission. |
|---|---|
| Fully Multi-Coated Lenses | Anti-reflective coatings on all air-to-glass surfaces provide increased light transmission for greater clarity and low-light performance. |
| Rubber Armor | Provides a secure, non-slip grip, and durable external protection. |
| Nitrogen Gas Purged | Gas purged and O-ring sealed for fogproof and waterproof performance. |
| Tripod Adaptable | Allowing use on a tripod or car window mount. Arca-Swiss foot. |
| Waterproof | Designed to withstand harsh weather conditions. |
| Fogproof | Designed to withstand a wide range of temperatures. |
| Shockproof | Designed to withstand impact. |
SPECIFICATIONS
| Magnification | 12-36x |
|---|---|
| Objective Lens Diameter | 50 mm |
| Linear Field of View | 173' - 89' |
| Angular Field of View | 3.3° - 1.7° |
| Eye Relief | 18.0mm |
| Length | 10.2" |
| Weight | 30.3 oz. |
| Close Focus | 13.9' |
Vortex Australian Warranty
Our warranty is about you, not us. It's about taking care of you after the sale.
The VIP stands for a Very Important Promise to you, our customers. We will repair or replace your Vortex product in the event it becomes damaged or defective—at no charge to you other then return post from you to us. It doesn't matter how it happened, whose fault it was, or where you purchased it. You can count on the VIP Warranty for all riflescopes, red dots, rangefinders, binoculars, spotting scopes and monoculars.
- Unlimited Lifetime Warranty
- Fully transferable
- No warranty card to fill out
- No receipt needed to hang on to
If you ever have a problem, no matter the cause, we promise to take care of you.
The VIP warranty does not cover loss, misuse, theft or deliberate damage to the product.
$217.00
The Astrozap AZ-114-C Flexi-Shield® is a flexible dew shield sized for the Celestron 14" Schmidt-Cassegrain. This version has no dovetail notch and fits C14 OTAs on CGX-L mounts.
Serious aperture needs serious dew protection
The C14's huge corrector plate is a dew magnet. A passive Flexi-Shield is the single most effective, power-free way to keep it clear through a long night of observing or imaging, while also cutting stray light for improved contrast on deep-sky targets.
Features
- Custom fit for the Celestron 14" SCT and EdgeHD
- Felt-lined interior absorbs moisture and suppresses reflections
- Heavy-duty ABS polymer construction
- Padded VELCRO® Brand closure for a secure, non-marring fit
- Rolls flat for transport, despite the large diameter
Compatible Celestron 14" telescopes
- CGX-L 1400 SCT
- CGX-L 1400 EdgeHD
Proudly made in the USA.
$83.00
At a glance
Stylish colour binoculars for entry level. Very handy for travel, concerts and sporting events. Colourful and high quality. Take this compact binoculars with you on your travels.
Features
Entry standard model.
Adopted as a model with reduced price while securing designs and basic functions familiar to hands.
Compact・red metallic body.
Compact body which does not get in the way even if put in a bag. If you lift it from the neck with a strap, you will complement fashion more.
It's easy to handle magnification.
Because it has moderate magnification and bright field of view, you can enjoy powerful images that can not be obtained with your eyes easily.
Multi-coated on objectives and eyepieces
Joyful MS8X21 binoculars brings the action up close with clear sharp views.
Specifications
| Magnification | 8x |
| Objective Lens Diameter | 21mm |
| Multi-coated on objectives and eyepieces Angular field of view | 7.0° |
| Apparent FOV | 52.1° |
| FOV at 1000m | 122m |
| Exit pupil | 2.6mm |
| Brightness | 6.8 |
| Eye Relief | 10.0mm |
| Interpupillary Distance | 57mm to 72mm |
| Size | 81 x 109 x 43 cm |
| Weight | 140g |
From $95.00
The 2-group 4-element Plossl optical design of the NPL series eyepieces delivers flat and clear images with good color correction. The NPL20, NPL25, NPL30 and NPL40 eyepieces employ twist-up eye-guards for viewing comfort. The lenses are fully multi-coated for high light transmission.
$55.00
Space Shuttle: A Photographic Journey is a captivating visual celebration of NASA’s pioneering spacecraft and is one the most well stunning books to arrive at BINTEL in a long time.
Commemorating 30 years of space shuttle exploration, this beautifully crafted photography book, now in a revised format, curates the finest NASA space shuttle images into one inspirational collection.
Arranged in thematic chapters ranging from the following:
• Launch Pad
• Lift-Off
• In Space
• Landings
From the launch pad through to the launch sequence, to the missions themselves and the dramatic conclusion of the return flight and landing, this is a fascinating photographic history of the world's first reusable spacecraft. Space Shuttle: A Photographic Journey pays tribute to the five pioneering orbiters built by NASA: Columbia, Challenger, Discovery, Atlantis and Endeavour. It was developed by author Luke Wesley Price through an exhaustive study of the NASA archives and painstaking post-production processing of images to enhance their visual impact, all guided by correspondence with inspirational shuttle pilots such as the late Bruce McCandless.
The book tells the story of the space shuttle through extraordinary moments in a selection of NASA's 135 shuttle missions. Beautifully reproduced photographs capture the drama and danger of the hazardous launch sequences and vividly depict the techniques and challenges of mission tasks, including space walks, in-flight maintenance work and docking with the International Space Station. The book also collates the details of every space shuttle mission flown, including launch dates and lists of crew, alongside a gallery of the 135 exquisitely designed mission patches.
Highly recommended for anyone with an interest in human space exploration.
AUTHORS:
Luke Wesley Price is a British graphic designer of over 20 years’ experience in branding, advertising and imagery, who founded his own design agency in 2008. He has had a lifelong interest in America’s space history, from Project Mercury through to Gemini, Apollo, Skylab, and beyond. As a child growing up in the 1980s, the space shuttle program was always the highlight and central thread of this passion, and in his research for this book he fulfilled the ambition of corresponding regularly with the shuttle pilots who had been his heroes. When not working in the world of design, Luke travels the world as a bass guitarist in bands including his own musical project RenattaJane. Luke lives in Essex.
Christopher J. Ferguson is a former NASA astronaut who was commander of the Space Shuttle Atlantis for flight STS-135, the final mission of the Space Shuttle program. Previously, on his first space mission (STS-115) in September 2006, he had been the pilot of Atlantis, and he commanded STS-126 aboard the Space Shuttle Endeavour in 2008. He retired from NASA in 2011 and is now director of Crew and Mission Operations for Boeing’s Commercial Crew Program.
$319.00
6.0" diameter, 4.0" high. Inside machined to fit G-11 and GM 8 mounts. Tube has 1/2" thick bottom with 1/2" hole in center, posts for the electronics are mounted on the side. Also used on top of permanent piers.
$1,399.00
The saxon GoTo EQ5 Mount with Steel Tripod provides the precision and stability needed for serious observing.
This GoTo EQ5 mount includes a built-in polar scope, a latitude adjuster with micrometer scale, an azimuth polar-alignment adjuster, aluminium setting circles, large manual slow-motion tracking controls, bubble level and steel tubular tripod legs
The saxon GoTo EQ5 Mount with Steel Tripod features and includes the following:
- A user friendly Synscan hand controller
- 2x 5.1Kg counter weight
- Wall-to-wall large accessory tray
- 1.75" stainless steel tripod legs
- 1.8 degree step angle and 32 micro steps driven
- Motor resolution at 0.288arc sec
- Slew speeds up to 3.4°/sec (800X)
- Sidereal, Solar and Lunar tracking rates
- One, Two and Three star alignment options
- Auto guider interface for astrophotography
- Guiding speed from 0.25x, 0.50x, 0.75x, or 1x
- Payload Capacity 9.1Kg
- Containing over 42,900 objects with complete Messier, NGC and IC Catalogues.
- Positioning accuracy up to 1 arc minute. Accuracy enhanced by software collimation error (mount mechanical error) compensation
- Periodic error correction
- Firmware upgradeable via internet download
- PC Compatibility
- Car power supply adapter included
- Requires 12V DC 2A power supply (not included).
$349.99
- Optimised for the Sky-Watcher Esprit 70EDX
- Reduces the telescopes focal length by a factor of 0.92x
- Provides much improved field-edge correction
Sky-Watcher 0.92x Reducer for Esprit 70EDX
Designed for serious astrophotographers. Optimised for the Sky-Watcher Esprit 70EDX. They effectively reduce the telescopes focal length by a factor of 0.92x and provide much improved field edge correction.
The QHY5III462 camera uses the Sixth Generation Sony 2.1 megapixel IMX462 STARVIS CMOS sensor. The pixel size is 2.9um making it the same size and resolution as the sensor used in the QHY5III290 camera that has been so successfully used for planetary imaging by some of the best planetary imagers in the world. Like other cameras in the 5III series, the QHY5III462 is USB 3.0 powered and controlled. No additional power is required.
The IMX462 sensor is back-illuminated and incorporates new technology that gives it some significant advantage over other planetary cameras: First, the IMX462 sensor has sHCG (Super High Conversion Gain) for very low read noise at high gain. This is ideal for stacking hundreds or thousands of short planetary images. Second, it is exceptionally sensitive in the NIR.
In this latest generation of sensors, the photodiode portion of the pixel well is physically deeper than in previous Sony BSI sensors, allowing photons of longer wavelength to penetrate deeper into the substrate. This dramatically increases the sensor’s sensitivity to red and near infrared (NIR) light. The RGB filters over the pixels become transparent at NIR wavelengths, so the sensor displays almost equal peak sensitivity to NIR light as it does to light in the visible spectrum.
The peak QE in the NIR around 800nm is as high as the peak QE in the visible wavelengths. For planetary imagers using a methane filter that passes light around 880nm this is welcome news.
BSI
One benefit of the back-illuminated CMOS structure is improved sensitivity. In a typical front-illuminated sensor, photons from the target entering the photosensitive layer of the sensor must first pass through the metal wiring that is embedded just above the photosensitive layer. The wiring structure reflects some of the photons and reduces the efficiency of the sensor.
In the back- illuminated sensor the light is allowed to enter the photosensitive surface from the reverse side. In this case the sensor’s embedded wiring structure is below the photosensitive layer. As a result, more incoming photons strike the photosensitive layer and more electrons are generated and captured in the pixel well. This ratio of photon to electron production is called quantum efficiency. The higher the quantum efficiency the more efficient the sensor is at converting photons to electrons and hence the more sensitive the sensor is to capturing an image of something dim.
Extended Near Infrared Sensitivity
Logically, one would think, each generation of Exmor sensor would be built upon and incorporate all of the improvements of the generation immediately preceding. However, this was not the case with the fifth generation Exmor R sensors.
The first back-illuminated sensors used shallower pixel wells (like the third-generation front- illuminated designs) than the physically deeper pixels of the fourth generation. So, while the back- illuminated structure increased the sensitivity in the visible range by 2X, the shallower pixels did not improve the NIR. The answer to this is seen in the latest, sixth generation, Sony Exmor R sensors, like the IMX462. Using physically deeper pixels in conjunction with the back-illuminated structure has dramatically improved the sensor’s sensitivity to both the visible and near infrared wavelengths.
sHCG Mode
Another advantage of the QHY5III462 is the camera’s “Super High Conversion Gain” capability. By using a lower capacitance, a small amount of charge can be converted to a high voltage resulting in higher sensitivity in low-light conditions. The readout noise of the QHY5III462 in high gain mode is as low as 0.5 electrons!
The test exposures below demonstrate the low light improvement over the IMX290 sensor. The QHY5III462C image is on the left and the corresponding QHY5III290C image is on the right. The low light conditions and exposures are identical for each top and bottom pair of images and a UV/IR filter was in place for each camera. So this test demonstrates the QHY5III462C’s increase in sensitivity and SNR over the QHY5III290C under the same conditions in the visual light spectrum alone.
Color and Mono Imaging
The filter matrix in the IMX462 uses organic dye filters. These filters are very efficient at visible wavelengths but become completely transparent in the NIR. For this reason, good RGB color balance requires an external UV/IR filter that blocks NIR wavelengths.
Many color cameras build this UV/IR filter into the camera or optical window for normal color imaging. However, in order to fully exploit the capabilities of the 462C sensor, in the QHY5III462C camera the optical window is AR coated only with no UV or IR blocking. Instead, the QHY5III462C camera includes two 1.25″ screw-in filters, a UV/IR cut filter to isolate the visible wavelengths for normal RGB imaging and an IR850 filter that will cut the visible wavelengths but pass wavelengths above 850nm.
Specifications
| Model | QHY5III462M/C |
| CMOS Sensor | SONY IMX462 BSI CMOS |
| Pixel Size | 2.9um x 2.9um |
| Effective Pixel Area | 1920 x 1080 |
| Effective Pixels | 2 MP |
| Fullwell | 12000e- |
| Readout Noise | 0.5e- |
| AD Sample Depth | 12-bit (output as 16-bit and 8-bit) |
| Sensor Size | Typical 1/2.8 inch (6.3mm) |
| Full Frame Rate | Full Resolution 135 FPS@8-bits (USB3.0 Port) |
| ROI Frame Rate | Higher rates at selected fields of interest (Supports any region ROI) |
| Exposure Time Range | 7us-900sec |
| Shutter Type | Electronic Rolling Shutter |
| Computer Interface | USB3.0 |
| Guide Port | Yes |
| Telescope Interface | 1.25-inch |
| Optic Window Type | Changeable 1.25-inch filter as optical window
(462C: Includes free 1.25-inch UV/IR cut filter and free 1.25-inch IR850 filter 462M: Includes a free 1.25-inch IR850 filter) |
| Back Focal Length | 12mm (±0.5) |
| Weight | 88g |
Camera Curves
$4,399.00
使用蔡司 Victory® SF 重新探索观鸟世界。您可以体验大自然提供的各种奇观,包括出色的光学性能和无与伦比的广角视野。Victory SF 重量轻、设计独特,具有动态快速对焦功能,让您可以长时间轻松观鸟而不会感到疲劳。Victory SF 是蔡司双筒望远镜 125 年发展历程中观鸟和野生动物观察的新标杆。
8 倍放大倍率的视野为 148 米/1000 米,可提供最宽广、最自然的视野,不会留下任何隐蔽之处。七镜片目镜可实现从边缘到边缘的极其清晰的聚焦。适中的放大倍率、均衡的重量分布和符合人体工程学的握柄使这款双筒望远镜易于握持,可让您轻松观看数小时。92% 的透射率和超过 5 毫米的大出瞳直径可揭示黑暗阴影或黄昏昏暗光线中的细节。
92% 透光率
Ultra-FL 概念包含几块肖特氟化玻璃,即使在最恶劣的条件和最具挑战性的环境下也能实现绝对的色彩保真度、亮度、清晰度和最精细的细节分辨率。
极宽的视野
由于鸟类经常躲藏在茂密的树丛中,因此拥有宽阔的视野至关重要,这样您才能发现任何细微的动作。与其他双筒望远镜相比,蔡司 Victory SF 双筒望远镜的宽阔视野可将可观察的兴趣区域增加多达 20%。根据型号的不同,视野范围在 120 米到 155 米之间,为用户提供令人印象深刻的概览。
逼真的图像质量
在鸟类识别方面,不能有任何妥协——必须在几秒钟内识别出细微的细节,才能准确可靠地进行识别。ZEISS Victory SF 系列专为应对观鸟过程中遇到的最苛刻的情况而开发。UFL 概念使光学性能最大化。这使用户能够应对最苛刻的观鸟场景,确保以绝对清晰度捕捉每一个珍贵的时刻。
SmartFocus 概念
出色的 SmartFocus 概念让您能够快速直观地做出反应,这要归功于改进的对焦速度。对焦轮位于三连杆桥中,可让您获得舒适自然的手部位置。防滑表面可让操作更轻松、更精确,并实现理想的对焦。
蔡司 T* 镀膜
蔡司 T* 镀膜是您在弱光条件下和黄昏时体验到的明亮高对比度图像的保证。然而,其背后并没有构建涂层的特定配方。相反,它是一种不断调整以适应新玻璃材料和要求的技术,并且每个镜头都有所不同。
ErgoBalance 概念
得益于ErgoBalance概念,双筒望远镜在手中达到了理想的平衡,通过减少上臂和下臂肌肉的压力,实现了长时间稳定观察,同时最大限度地减少疲劳。
无论天气如何,视野都清晰
大自然中总有令人兴奋的事物值得观赏——即使在潮湿的天气。这就是蔡司开发 LotuTec® 的原因。这是一种用于双筒望远镜和观景镜镜片的涂层,可在所有天气条件下实现清晰无阻的视野。
| 放大 | 8 × |
| 有效透镜直径 | 42 毫米 |
| 透光率 | 92% |
| 出瞳直径 | 5.3 毫米 |
| 暮光因素 | 18.3 |
| 1,000 米(码)处的视野 | 148 米(444 英尺) |
| 主观视角 | 西经 64° |
| 近对焦距离 | 1.5 米(4.9 英尺) |
| 屈光度调节范围 | − 4.0 | + 4.0 dpt |
| 出瞳距离 | 18 毫米 |
| 瞳距 | 55 – 76 毫米 |
| 镜头类型 | 超荧光 |
| 棱镜系统 | 施密特-佩肯 |
特征
| LotuTec | 充氮 | + | + |
| 防水性能 | 400 毫巴 |
身体的
| 工作温度 | − 30°C | + 63°C(− 22°F | + 145°F) |
| 长度 | 173 毫米 (6.8 英寸) |
| 瞳距为 65 毫米时的宽度 | 125 毫米 (4.9 英寸) |
| 重量 | 790 克(27.8 盎司) |
$2,155.00
作为一款传统的轻型双筒望远镜,Habicht 型号具有令人印象深刻的技术规格。即使是使用 Porro 设计也反映了对更精细细节识别的渴望,而 10 倍放大倍率则提供了这种需求。
规格
| 放大 |
10倍
|
| 有效物镜直径 |
40 毫米
|
| 出瞳直径 |
4 毫米
|
| 出瞳距离眼部缓解 mm |
13 毫米
|
| 视野为 1,000 米 / 英尺 / 1,000 码 |
108米/1000米
|
| 视场度 |
6.2°
|
| 戴眼镜时的视野 (°) |
5.2°
|
| 视场角 |
60°
|
| 最短对焦距离 |
4 米
|
| 屈光度调节 |
± 5 点
|
| 无穷远屈光度校正 |
5 点
|
| 透光率 |
96%
|
| 瞳距 |
56-72 毫米
|
| 暮光系数符合 ISO 14132-1 标准 |
20
|
| 长度(毫米)。 |
151 毫米
|
| 宽度(毫米)。 |
172 毫米
|
| 高度(毫米)。 |
55 毫米
|
| 重量 |
690 克
|
| 功能温度 |
-25 至 +55 °C
|
| 存储温度
|
-30 至 +70 °C
|
$5,349.00
iOptron CEM70AW Center-Balanced Equatorial Mount
Following the success of the acclaimed iOptron CEM60, we’re excited to introduce the next generation of center-balanced equatorial mounts — the CEM70 and CEM70AW.
The CEM70AW sets a new standard in the 70 lb payload class, offering advanced features such as USB 3.0 connectivity and built-in Wi-Fi.
Precision. Balance. Performance.
Retaining the inherent advantages of the center-balance design, these medium-payload mounts deliver the efficiency, accuracy, and portability that astronomers demand.
With precise GoTo pointing and tracking accuracy better than ±5 arcseconds, the CEM70 is a solid performer for both visual observers and astrophotographers.
Innovative features such as the integrated iPolar™ electronic polar scope, large easy-lock gear levers (usable with gloves), and an advanced cable-management system demonstrate iOptron’s commitment to real-world usability.
The CEM70AW includes both the iPolar™ electronic polar scope and a hard case for convenient transport and protection.
Key Features
- New center-balanced design (CEM) for maximum payload and natural stability
- Ideal for both visual observing and astrophotography
- 70 lb (31.8 kg) payload capacity with a mount weight of only 30 lb (13.6 kg)
- Reliable, easy-to-use gear clutches
- Precision altitude and azimuth adjustments
- High-precision stepper motors (0.07 arcsec resolution) for accurate GoTo and tracking
- Integrated iPolar™ electronic polar scope
- Go2Nova® 8410 controller with Advanced GoToNova® technology and built-in heater
- High-precision tracking with periodic error < ±5 arcsec
- Permanent Periodic Error Correction (PPEC)
- Built-in 32-channel GPS
- Integrated Wi-Fi for remote operation
- USB 3.0 connection for modern data-transfer speeds
- ST-4 autoguiding port
- Advanced cable-management system with multiple output options
- Spring-loaded 8″ dual Vixen/Losmandy saddle
- Includes iOptron-subsidized TheSky Imaging Edition software
Technical Specifications
| Mount type | Center-balanced Equatorial Mount (CEM) |
| Payload capacity* | 31.8 kg (70 lb) – excluding counterweight |
| Mount weight | 13.6 kg (30 lb) |
| Payload : Mount weight ratio | 2.33 |
| Construction | All metal |
| Latitude adjustment | 0° – 65° |
| Azimuth adjustment | ± 4° |
| Periodic error (encoder) | < ± 5 arcsec |
| Worm period | 348 sec |
| Periodic Error Correction | PPEC |
| RA worm wheel | Ø 151 mm, 248 teeth |
| DEC worm wheel | Ø 151 mm, 248 teeth |
| Worm diameter | Ø 21.2 mm |
| RA axle | Ø 55 mm (steel) |
| DEC axle | Ø 55 mm (steel) |
| RA bearings | Ø 80 mm |
| DEC bearings | Ø 80 mm |
| Counterweight shaft | Ø 28 × 415 mm (SS, 1.9 kg) |
| Counterweight | 9.5 kg (20 lb) × 1 |
| Mount base diameter | Ø 152 mm |
| Motor drive | Precision stepper motor with 128 micro-steps |
| Resolution | 0.07 arcseconds |
| Max slew speed | 3.75°/sec (900×) |
| Hand controller | Go2Nova® 8410 (8-line × 21-character LCD) |
| Power requirement* | DC 12 V 5 A (5.5 mm / 2.5 mm plug) |
| Power consumption | 0.6 A (tracking) / 0.8 A (GoTo) |
| Polar scope | Internal iPolar™ electronic polar scope |
| Meridian treatment | Stop (0–10° pass) or auto flip |
| Zero position | Automatic zero search |
| Park positions | Horizontal, vertical, current, alt/az input |
| Level indicator | Yes |
| Dovetail saddle | 8″ Losmandy D & Vixen |
| GPS | Yes (32-channel built-in) |
| Guiding port | ST-4 |
| Communication ports | USB 3.0, Wi-Fi |
| Cable management | 1 × DC 12 V (3 A), 3 × USB 3.0, 1 × DC in / 2 × DC out, iPort |
| USB input support | Mount, iGuider, iPolar, and more |
| Operating temperature | −10 °C to +40 °C |
Manuals & Resources
High capacity tripod head - ideal for larger spotting scopes
- 3/8"-16 threaded hole
- Supports up to 6kg loads and offers 5+0 steps of counterbalance and continuous pan and tilt drag
- Tilt range is a wide +90/-75°, and the pan range is a full 360°
- Two camera screws are supplied, 1/4"-20 and 3/8"-16
1/4"-20 threaded hole on each side of the head to which you can secure articulating arms
Specifications:
- Product Width : 19.5cm
- Product Height : 15.5cm
- Product Weight : 1.62kg
- Drag Control : Fixed
- Pan Lock (Video) : Fixed
- Tilt Lock (Video) : Fixed
- Panning Range : 0-360°
- Separate Panning Lock : Yes
- Quick Release Plate : QR6PRO
- Bubble Level : Yes
Features:
- 30-70x Eyepiece Included
- Bright, wide, crystal clear
- Large 99mm objective lens
- Dual focus - pin point control
- Tough, lightweight & portable
- Designed to digiscope
RIGHT, WIDE, CRYSTAL CLEAR
LARGE 99mm OBJECTIVE LENS
DUAL FOCUS - PIN POINT CONTROL
TOUGH, LIGHTWEIGHT & PORTABLE
DESIGNED TO DIGISCOPE
From $220.00
All Astronomik Filters are perfect for modern cameras, including both CMOS and CCD based cameras, allowing you to capture the very best images possible with your instruments. Sharpness, contrast and the absence of any reflections is guaranteed.
Each and every Astronomik filter has to pass a complex quality control process before being suitable for delivery to our customers. Each and every emission line filter is measured with a high-end Perkin-Elmer spectral-photometer to make sure that every single filter is up to the specifications published on our website.
On the back of each filter-box you will find a label that details the precise sensitivity and band pass measurements for that individual filter inside the box: You will see the max transmission and the recommended range of focal ratio were the filter will give you the best performance.
Thus Astronomik OIII CCD filter is a narrow band emission-line-filter for CCD photography. The filter lets the light of double ionized Oxygen of emission nebulae pass and blocks nearly the whole remainder of the spectrum where the CCD is sensitive.
The full width at half maximum (FWHM) of 12 nm is optimal suitable for common CCD cameras and allows the use of very fast optics The optimal aperture ratio for the use of the filter is 1:3 to 1:15 with apertures of more than 6" (150mm). It should be noted that the filter has a transmission of up to 99%, which cannot be attained by stacking more narrow-band filters. A further note, which led to selecting the half width (FWHM), is the dark current of common CCD imagers. Exposures with a CCD cooled to -15°C are limited by the dark current of the CCD, even in large cities with a bright background.
Another advantage of the 12 nm filter is the better availability of guiding stars for cameras with a built-in-autoguider (SBIG). If you use a very strong filter like our H-alpha 6nm filter you often won’t find a usable guidestar.
Together with our other three Astronomik emission-line filters you can do great color images even from very light polluted places!
Main use
The Astronomik OIII CCD increases the contrast between objects, in this case between the OIII emission line and the skyglow background. Our Astronomik OIII CCD completely suppresses the emission lines of artificial lighting (mercury (Hg) and sodium (Na)) and skyglow. Transmission losses and chromatic distortions, which arise with other filters, only occur with Astronomik filters when extremely bright aperture ratios of 1:2 and more come into play. The filter has a built-in IR-blocker up to 1150nm. You don’t need an additional IR-blocker with this filter.
Other uses
- When using the Astronomik OIII CCD filter togther with the H-alpha, OIII CCD and the SII CCD filters you can obtain three-color images of emission line objects (gas nebulae) from locations with very strong light pollution. To do so, you would take an image in three different wavelengths, select each one as a color-channel in Photoshop and paste them together as one single color image.
- If you plan to create color images from emission line data, our CLS CCD filter is a great choice for the Luminance channel
- The OIII CCD is also great for visual observation. If you plan to get filters for visual observation and for astrophotography get the CCD filter: You may use this filter visual as well as in front of you camera. The built-in IR-blocker doesn’t disturb visual observation but you need an additional IR-blocker if you want to use the visual filter with your camera.
Suitability
- Visual observation (dark skies): Very good, huge contrast enhancement at O III-emission nebulas
- Visual observation (urban skies): Very good, huge contrast enhancement at O III-emission nebulas
- Film photography: It depends, very long exposure time
- CCD photography: Very good, huge contrast enhancement at O III-emission nebulas
- DSLR photography (original): Very good, huge contrast enhancement at O III-emission nebulas
- DSLR photography (astro modified): Very good, huge contrast enhancement at O III-emission nebulas
- DSLR photography (MC modified): Very good, huge contrast enhancement at O III-emission nebulas
- Webcam / Video (Planets): Unsuitable
- Webcam / Video (Deep Sky): Reasonable, if light pollution is a big problem and OIII Objects are beeing observed
Technical Data
- typ. 95% transmission at 496nm (OIII)
- typ. 95% transmission at 501nm (OIII)
- full width at half maximum 12nm
- transmission from 494nm to 506nm
- Parfocal with other Astronomik filters
- Glass thickness: 1mm
- Completely resistant against high humidity, scratches and aging effects
- Diffraction limited, the filter will not reduce the optical performance of your telescope!
- Astronomik filters are delivered in a high-quality, long lasting, filter box
- Since 2008 we do ship filters with a completely new design. Any kind of halo or strange reflection is a matter of past
These are amazing binoculars developed for the longest distances, and even used on missions to the International Space Station (ISS).
The exceptional light transmission of the Porro prism system guarantees the brightest viewing images with outstanding resolution of the finest details even at 20 × magnification.
The technically unique mechanical image stabilisation system of the ZEISS 20 × 60 T* S ensures a perfect viewing experience: the unavoidable shake always encountered when observing with handheld binoculars can be easily eliminated at the press of a button.
Image stabilisation
The purely mechanical image stabilisation system with its gimbal-mounted spring joint and magnetic damping action works immediately at the touch of a button, noiselessly and without battery power. This results in a unique visual experience, such as you have never seen before - totally free of unavoidable hand tremor.
Extreme performance in magnification and lens diameter
The 20 x magnification provides an outstanding level of detail resolution. You can make out the finest of details when aiming at game and can be secure in your decision to take a shot. Extreme brightness is supplied by the 60 mm lens and Porro prism system
Robust mechanics
The image stabiliser is a mechanical masterpiece and naturally needs protection during harsh use, when idle or during transport. Secure, automatic locking of the moving parts when not in use and the solid, rubber armour of the metal casing serve to protect the internal optics and mechanics
ZEISS T* Coating
ZEISS T* coating is a guarantee of the brilliant, high-contrast images which you will experience above all in adverse light conditions and in the twilight. Behind it, however, there is no specific formula for building up the layers. Instead, it is a technology that is constantly adjusted to suit new glass materials and requirements, which varies from lens to lens.
Performance
|
Magnification |
20 × |
|
Effective lens diameter |
60 mm |
|
Exit pupil diameter |
3 mm |
|
Twilight factor |
34.6 |
|
Field of view at 1,000 m (yds) |
52 m ( |
|
Subjective viewing angle |
60° Ww |
|
Close focusing distance |
14 m |
|
Diopter adjustment range |
− 7.0 | + 7.0 dpt |
|
Pupil distance |
57 – 73 mm |
|
Lens type |
Achromat |
|
Prism system |
Porro |
Features
|
LotuTec | Nitrogen filled |
- | - |
|
Water resistance |
- |
Physical
|
Operating temperature |
− 20°C | + 40°C |
|
Length |
275 mm |
|
Width at an interpupillary distance of 65 mm |
161 mm |
|
Weight |
1.660 g |
$625.00
无论是在体育赛事、剧院还是户外,Monos 都是多功能的大师,可以舒适地放入夹克口袋或手提包中。根据型号的不同,它们非常适合用作放大镜,甚至用作双筒望远镜。它们可以通过将放大倍数增加三倍,将您的双筒望远镜变成一个观察镜。即使是最小的细节也可以看到:没有什么能逃过它们的注意。它们还可用于远距离观察或详细识别猎物。
随时可用
小巧、轻便、运动型 - 紧凑型 Monos 非常适合自然远足、音乐会或体育赛事。它们以闪电般的速度将物体带到手臂长度,让您看清每一个细节。屈光度调节范围可达 +/- 4 屈光度。
蔡司 T* 镀膜
蔡司 T* 镀膜是您在弱光条件下和黄昏时体验到的明亮高对比度图像的保证。然而,其背后并没有构建涂层的特定配方。相反,它是一种不断调整以适应新玻璃材料和要求的技术,并且每个镜头都有所不同。
| 放大 | 4X |
| 物镜直径 | 12 毫米 |
| 视角 | 10.3°(实际) |
| 视场 | 180 米 @ 1000 米 |
| 最小焦距 | 45.7 厘米 |
| 出瞳直径 | 3 毫米 |
| 眼部舒缓 | 15 毫米 |
| 屈光度调节 | -4 至 +4 |
| 防雾 | 不 |
| 防水性能 | 防水 |
| 长度 | 6.1 厘米 |
| 重量 | 45 克 |
50 mm bright. 42 mm light.
ZEISS SFL 50 Binoculars
The ZEISS SFL 50 binoculars offer premium optics in an exceptionally lightweight and compact design, rivalling traditional 42mm models. Combining outstanding optical performance with portability, they are the perfect choice for those seeking optical excellence and convenience.
The SFL 10x50 provides a versatile 10x magnification, allowing for detailed observation of wildlife while still maintaining a comfortable field of view, ideal for both birdwatching and nature exploration.
Compact and as light as 42 mm binoculars
The optical design prioritizes optimal compactness, featuring thinner lens elements, reduced lens diameter and minimized spacing between lenses. The magnesium housing ensures durability while keeping the weight low, allowing for comfortable, long-term use without fatigue.
Lighter and more compact - how?
The SFL range has become a favourite with bird watchers and nature fans since their launch. Now the SFL 50 delivers viewing normally found using larger optics, but in a smaller size body.
The ZEISS SFL is shorter and more compact than many other other premium binoculars due to:
Thinner lens elements
Smart design reduces the distance between optical components
Schmidt-Pechan prism design reduces the size while maintaining optical performance
Experience nature in all its splendour
The Ultra-High-Definition (UHD) concept features a special coating and an improved optical design that ensures the binoculars deliver the highest level of detail and reproduce colours with natural fidelity. This makes it possible to precisely identify the smallest features in the plumage and reliably distinguish between species.
High Performance Optics with UHD Concept
- Large entrance & exit pupils combined with 90 % light transmission ensure bright viewing experience especially in low light conditions
- True-to-life colours provide exceptional colour fidelity for accurate identification of wildlife
- Wide Field of View making it easier to track moving subjects
- Close Focusing Distance of just 1.8 m allows detailed observation of nearby targets
Bright images even in low light
With 90% light transmission, their large entrance pupil of 50 mm and the ZEISS T* multi-layer coating, you can clearly and precisely see details even in low-light situations and at dusk.
Waterproof, fogproof and UV resistant - perfect for Australian conditions
- Natural rubber armouring material, a NRB compound which is Latex-free and PAH compliant
- Water repellent ZEISS LotuTec lens coating ensures that water beads off without residue immediately, and that dirt and fingerprints do not adhere to the surface.
Perfect Ergonomics
- SmartFocus Concept features a large focus wheel positioned for optimal accessibility, preventing over-stretching of the focusing finger
- Quick & Precise focusing for fast adjustments, even when wearing gloves
- Perfectly balanced in the hands, enabling long and steady observation
- Smooth and robust eyecups enhance comfort and usability
Upsize
What are the benefits of 50 mm optics compared to 42 mm optics?
45% more light>
50mm binoculars collect 42% more light than a 42mm models for brighter views and better clarity. They also offer a larger exit pupil for more comfortable viewing and more immersive experience.
ZEISS SFL 8x50 Specifications
| Magnification | 10x |
| Objective lens diameter | 50mm |
| Light Transmission | 90% |
| Exit pupil diameter | 5.0mm |
| Twilight factor | 22.4 |
| Field of view m/1000m | 122m |
| Close focus range | 1.8m |
| Diopter adjustment range | ±4 |
| Subjective viewing angle | 66° Ww |
| Exit pupil distance | 20mm |
| Interpupillary distance | 56-74mm |
| Tripod adapter interface | Yes |
| Length | 160mm |
| Weight | 855g |
From $849.00
- Piggyback dovetails for mounting accessories atop an optical tube. These dovetails accept Losmandy D-style accessories.
- Piggyback Dovetail Assemblies come with mounting brackets and a Losmandy style dovetail for mounting accessories on your CDK14, 17, 20, 24, and 700.
Please Note- For CDK17 users:
- 170990 – is for the current CDK17 design with 10.24” of backfocus
$375.00
Protection for your ZEISS Harpia Spotting Scope
The case offers reliable protection against all kinds of weather and wet conditions, is comfortable to carry and enables fast readiness of the spotting scope for use.
The caps for the eyepiece and the objective lens can be securely attached to the case to prevent loss.
$1,775.00
高品质光学元件和高清概念
Conquest HDX 的光学卓越性基于 HD 概念:完美平衡的光学系统,结合了精选涂层、镜头和精细调整的光学设计。它可实现 90% 的透光率,从而获得最明亮的图像;色彩保真度高,从而获得逼真的图像,不会出现色边和色偏,实现完美识别;边缘到边缘的清晰度高,从而在整个视野范围内获得清晰细致的图像。
坚固耐用的设计
Conquest HDX 可在任何环境下使用,无论是极端温度、潮湿环境还是阳光直射。其耐用、防水和防震的特点归功于其坚固的机械设计和轻质镁合金外壳。此外,它覆盖有保护性橡胶装甲,在任何情况下都能提供完美的抓握力。
精心设计的人体工程学
经过精心设计的人体工程学设计,防滑手柄和平滑精确的调焦轮让长时间观察时也能舒适操作。可调节眼罩和可锁定屈光度设置确保个性化的观看体验。
无论天气如何,视野都清晰
大自然中总有令人兴奋的事物值得观赏——即使在潮湿的天气。这就是蔡司开发 LotuTec® 的原因。这是一种用于双筒望远镜和观景镜镜片的涂层,可在所有天气条件下实现清晰无阻的视野。
蔡司 T* 镀膜
蔡司 T* 镀膜是您在弱光条件下和黄昏时体验到的明亮高对比度图像的保证。然而,其背后并没有构建涂层的特定配方。相反,它是一种不断调整以适应新玻璃材料和要求的技术,并且每个镜头都有所不同。
规格
放大
10 ×
有效透镜直径
32 毫米
透光率
90%
出瞳直径
3.2 毫米
暮光因素
17.9
1,000 米(码)处的视野
118米
主观视角
西经 64°
近对焦距离
1.5 米(11.5 英尺)
屈光度调节范围
− 4.0 | + 4.0 dpt
出瞳距离
16 毫米
瞳距
54 – 74 毫米
镜头类型
高清
棱镜系统
施密特-佩肯
特征
LotuTec | 充氮
是|是
防水性能
400 毫巴
方面
工作温度
− 20°C | + 63°C
瞳距为 65 毫米时的宽度
115毫米
重量
620克
长度
132毫米
$679.00
Antlia SII 3nm Pro 窄带滤光片将 FWHM(半峰全宽)优化至 3nm 带通。随着带宽变窄,3nm Pro 窄带滤光片通过降低不需要的背景信号来增强发射目标的对比度。Antlia SII 3nm Pro 滤光片旨在在 671.6nm 线上提供 88% 的透射率,为您提供最大信号和清晰的星云结构。
传统的较宽窄带滤光片由于强烈的中心波长 (CWL) 偏移而导致传输严重损失。我们保证在中心带宽 1nm 范围内 T>88%,这意味着 3nm Pro 窄带滤光片可以保证高透射率,适用于长焦比和快速光学系统。蓝移数据显示,Antlia SII 3nm Pro 滤光片几乎可以与所有速度高达 f/3 的系统一起使用,发射信号损失最小,并满足 Hyperstar 和 RASA 等快速光学器件的要求。
带外阻断规格为 OD5(0.001%),可提供出色的 SNR(信噪比)和有效截止率,以最大限度地减少来自其他波长的干扰。改进的锐利截止天文摄影 3nm Pro 滤镜旨在最大限度地减少明亮恒星周围的光晕。
用途与性能:
高透射率和最小带宽可最大程度地提高对比度
陡峭的光谱轮廓最大程度地减少了明亮恒星周围的光晕
单一基板可消除内部反射
窄带物体:SII 发射星云、行星、沃尔夫-拉叶星云和超新星遗迹
在光污染区域和黑暗场所使用
月亮升起时延长成像时间
所有 Antlia 窄带 Pro 滤镜均可在 F/3 下使用,但信号会略有损失
所有 Antlia 窄带滤光片的边缘均经过涂黑处理,以消除杂散光的内部反射
卓越的光学可靠性减少了后期图像处理
该滤镜不适用于不包含 SII 发射的深空物体。
技术规格:
基础基板:肖特光学基板
滤光片厚度: 2mm+/-0.05mm(2''安装)
FWHM(半峰全宽): 3nm
CWL(中心波长) :671.6nm
峰值透过率: >88%
阻断: > 5 OD(0.001% 带外阻断)@ 300-1000nm
表面质量: S/D(划痕/凹陷)= 60/40(参考 MIL-O-13830)
透射波前: Lambda/4 或更好。
平行度:小于 30 角秒
单面/无胶基材
保修:3 年防脱层
SKU: ANTLIASii3nm2
$339.00
- This adapter presents M54 x 0.75 male threads on the camera side and presents SecureFit on the telescope side.
- Backfocus distance occupied by this adapter is 0.25″.
- Designed for use with ZWO and QHY cameras and filterwheels that accept M54.
- If using with other equipment please check the adapter PDF drawing in the download section below to confirm fitment for your specific application.
$599.00
The SmartOne Stereo Pro Microscope is a versatile and high-performing optical instrument, ideal for hobbyists, educators, and professionals in fields such as repairers, electronics, and gemology. Designed for precision and ease of use, this microscope provides sharp, three-dimensional views of specimens for detailed examination.
Key Features:
- Magnification: 10x, 15x, 20x, 30x, 40x, 60x, 80x
- Binocular Viewing Head: Provides a comfortable, ergonomic experience during prolonged use.
- Objectives: Equipped with 1x, 2x, and 4x objectives for adjustable focus and clarity.
- Eyepieces: Includes 10x, 15x and 20x wide-field eyepieces for enhanced viewing flexibility.
- Stage: Comes with a Black/White Contrast Plate and a Frosted Glass Plate for enhanced sample visibility.
- Illumination: Bright and even LED illumination for detailed observation.
Applications:
- Education: Ideal for home schooling, schools, and universities.
- Industrial Use: Ideal for inspecting circuit boards, small parts, and precision engineering.
- Gemology & Hobbies: Perfect for jewelry inspection, coin collection, and crafting.
The saxon SmartOne Pro Stereo Microscope combines quality optics, a robust design, and ease of use, making it an excellent choice for both professionals and enthusiasts.
| Warranty Information | 3-Years Limited Warranty |
|---|---|
| Eyepiece | WF 10x / WF 15x / WF 20x |
| Magnification Range | 10x, 15x, 20x, 30x, 40x, 60x, 80x |
| Objectives | 1x 2x, 4x |
| Field of View | 20mm, 10mm & 5mm |
| Working Distance | 76mm |
| Illumination | Top Illumination 1W LED & Bottom Illumination 7*20mA LED |
| Head Type | Binoculars |
| Focus | Yes |
| Condenser | N/A |
| Stage Type | Black/White Contrast Plate, Frosted Glass |
| Stand | Pillar with Handle |
| Power Supply | 5v 1000mA AC Power or 3x AA Batteries |
$3,999.00
组合 CCD 成像套件包括:
- TRIUS PRO-694 蓝色版相机
- Lodestar PRO 导航仪
- 带有内置 OAG 的 Midi 滤镜轮(带 7 x 1.25 英寸滤镜轮转盘)
相机详细信息
- 中等格式,高分辨率“Exview”CCD 芯片,在 15.98 毫米对角线阵列中具有 6,050,000 x 4.54uM 方形像素。
- 极低的暗信号 – 大多数深空物体不需要暗框。
- 在黄光下 QE 峰值为 77%,在氢阿尔法 (656 nm) 下 QE 峰值为 65%,表现出色。
- 内置三端口供电 USB 集线器。可驱动 Lodestar PRO 或 Ultrastar PRO + SX 滤光轮。
- 高性能两级冷却,温差优于 -40C
- 干氩 CCD 腔填充可提高冷却性能。
- 极其有效的抗晕光效果,对线性的影响极小,且不会丢失有效面积。
- 后焦距16mm+/-1mm。
- 高速 USB 2.0 接口,下载时间约为 2.5 秒。
- 内置三重供电 USB 集线器,用于导星仪和滤光轮控制。
- 通过单个 USB 电缆控制所有功能 – 摆脱危险的电缆缠绕!
- 功耗极低。12V DC 时电流小于 1.5 安培。
- 小巧轻便 - 直径仅 75 毫米 x 长 70 毫米 - 望远镜负载不到 500 克。
规格
- CCD 类型:ICX694AL Exview CCD,具有超低暗电流和垂直防晕染功能。
- CCD 全分辨率像素数据:像素大小:4.54uM x 4.54uM,图像格式:2750 x 2200 像素
- CCD 图像区域:12.49mm(水平)x 9.99mm(垂直)。
- CCD 质量:1 级或更好 - 无坏列、无坏点、“热”像素不超过 50 个(<10 秒内饱和)。
- 光谱响应:QE 最大值为 580nM(~77%),50% 下降为 360nM 和 770nM。
- 读出噪声:通常仅为 3.5 个电子 RMS。
- 满阱容量:大于 17,000 e-(未分箱)
- 抗晕光:过载裕度大于800x。
- 暗电流:小于 0.002 电子/秒@-10C CCD 温度。
- 数据格式:16位。
- 系统增益:0.27 个电子/ADU
- 计算机接口:内置USB 2.0兼容接口。
- 图像下载时间:全分辨率下通常为 2.5 秒。
- 电源要求:115VAC/240VAC @ 12VA,或 12VDC @ 900mA 最大。
- 冷却系统:通过热电冷却器调节设定点冷却供应,使CCD温度至少比环境温度低约-40C。
- 尺寸:75 x 70mm 黑色阳极氧化铝筒,CCD 窗口端有 42mm“T2”螺纹,后部有输入/输出插头。提供 CCD 对准螺钉,用于将芯片设置为与焦平面平行。
- 重量:约450克。
Loadstar Pro 详细信息
Lodestar PRO 是广受欢迎的 Lodestar X2 自动导星仪的升级版,下载速度更快,电子读取噪音更低。原版 Lodestar 使用了索尼的 ICX429 Exview 芯片,灵敏度极佳。然而,Lodestar X2 和 Lodestar PRO 使用的是索尼的 CCD 升级版 ICX829,QE 和读取噪音显著改善。这款新的“Exview 2”芯片使 Lodestar 的灵敏度几乎翻倍,并将最小导星亮度增加了近一个星等。我们还重新设计了电路板,以便使用标准 RJ12 导星插座。这将让许多觉得小型“ZH”电缆插座太过脆弱的用户感到满意。
规格
- CCD – 索尼 ICX829AL ExView2 单色 CCD
- 像素数 – 752(水平)x 580(垂直)
- 像素大小 – 8.6 x 8.3uM
- 光学尺寸 – 6.47 x 4.81 毫米
- 读取噪声 – 通常为 5.5 个电子
- 增益 – 0.4 e/ADU
- 镜筒尺寸 — 直径 31.75 毫米 x 长 85 毫米(1.25 英寸目镜推入尺寸)
- 镜筒螺纹 - 25.4 毫米 x 0.75 毫米“CS”接口镜头螺纹
- 计算机连接 – 用于 USB2.0 的“Mini B”USB 插座
- 输出连接 – 标准 RJ12 自动导星插座
- 输出类型 - 光电隔离 4 线 (N、S、E 和 W) 下拉,带公共返回线
- 下载速率 – 在 2×2 模式下约为每秒 10 帧(推荐)
Showing 960/1788
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.