The design has been developed to be sturdier and more rigid with quicker dampening time
Increased load capacity to 25kg (55lb)
Improved motors provide more torque, better slewing and tracking under heavy loads
Heavy Duty belt-drive system minimizes backlash while providing smooth motor operation under heavy loads

Spring-loaded brass worm wheel and stainless steel worm gear reduce friction and provide optimum gear mesh
Internal cabling for worry-free remote operation. Power input and accessory ports remain stationary while the mount slews to avoid snags
Internal hard stops for both axes prevents cable tension and tripod strike

Internal optical sensors on both axes for simple and safe remote operation

Home sensors allow the mount to always start in the index position regardless of orientation before a power reset
Limit sensors automatically shut off slewing or tracking before reaching the hard stop fail safe
Control software developed in conjunction with PlaneWave Instruments for professional level control operation and imaging
Software includes multi-point mount modeling for extremely precise pointing accuracy and many more additional features for remote astroimaging
Wider tripod stance for improved stability
Adjustable EQ head position to optimize center of gravity over the tripod and fully utilize the increased 3º-65º latitude range
Dual-fit CG-5/Vixen and CGE/Losmandy dovetail saddle

Improved tripod includes:

2" steel legs with height index marks for quick leveling
"Jack of all trays" can hold three 1.25" eyepieces, two 2" eyepieces, your smartphone, or other accessories
+20º of additional tracking past the meridian on either side
Tripod legs can be collapsed with accessory tray installed for faster setup and transport

Improved ergonomics:

Two handles for easy pickup and transport

Ergonomically designed dovetail clamping knobs
Innovative and improved polar alignment adjustment system

Ergonomic latitude adjuster for smooth and easy adjustment under full loads
Optional add-on polar axis finderscope - coming soon

Electronics

NexStar+ hand control with USB port
Two AUX accessory ports to support wireless/WiFi alignment and operation with StarSense AutoAlign and SkyPortal WiFi Module accessories (sold separately)
USB 2.0 port, used to connect directly to PC with included software
Autoguider port
PPEC ready
Threaded 12VDC power input barrel connector
Internal Real Time Clock (keeps time and site information saved)

Celestron CGX German Equatorial Mount and Tripod Specifications

Download the Celestron PWI Software for PC control of the Celestron CGX Mount here

https://www.youtube.com/watch?v=diM2-oBYI3A

https://www.youtube.com/watch?v=fmnNr_H9ZQI

Description

• Three-in-one GoTo mount can operate in GoTo Equatorial mode holding one telescope, or in GoTo Altazimuth mode holding one or two different telescopes
• Capable of holding a 20kg telescope payload -- ideal for any observational or astrophotographic pursuits
• Accurate belt-driven stepper motor drive system minimises backlash. Movements in any direction are immediate greatly assisting autoguiding accuracy. The responsive GoTo system can locate any of over 42,000 celestial objects with a pointing accuracy of 5 arc-minutes
• Features dual encoders on motors and each axis to maintain alignment. The mount can be de-clutched and moved after alignment and still maintain alignment.
• Dual dovetail saddle for use with Vixen Style narrow or Losmandy "D" style wide dovetail plates, 25.4mm diameter retractable counterweight shaft, new threaded power input jack and threaded DC cable, built-in autoguider port, PPEC capability, 9 slew speeds, and North/South hemisphere polar alignment scope

Skywatcher's new AZ-EQ6 mount is capable of carrying a heavy payload for your visual and astrophotography requirements. It is a very efficient transportable mount weighing only 15 kg, for a load capacity of 20 kg (counterweight excluded).

An excellent feature of the AZ-EQ6 SynScan is the patented dual-encoder technology. This technology allows the telescope to be moved manually in either axis without the mount losing its positional information which gives enormous freedom and convenience for users.

New Features :

• German Equatorial / Alt-Az dual mode
• Permanent periodic error correction(PPEC). PPEC can be trained with Autoguider or PC.
• Belt drive - Super smooth PE curve. Low backlash, silent slewing.
• Shutter release control for batch exposures of astrophotography.
• New motor controller with higher torque and accuracy.
• Include two dual-fit (45mm/75mm) saddle for mounting two telescopes.
• Improved reliable power supply outlet.
• Polar-alignment with polar-scope or SynScan HC's polar-alignment routine.
• Primary axis encoder tracks the mount's position. Users can push the mount at any time without worrying about losing the mount's alignment.

The Skywatcher NEQ6 Equatorial Mount has a well earned reputation as an affordable and capable GoTo mount for both visual and photographic use. Now Skywatcher has developed the enhanced, more versatile AZ-EQ6 GoTo Mount. This new mount promises to become a favourite among intermediate to experienced observers and astrophotographers. This three-in-one smart mount not only operates in equatorial GoTo mode holding one telescope, but also in Altazimuth GoTo & Tracking mode while holding one or even two different telescopes. Control the Skywatcher AZ-EQ6 via the included SynScan hand controller, or robotically with your PC/laptop, or even wirelessly from your iOS mobile device with Orion's StarSeek software and Wi-Fi module (sold separately).

In addition to the dual Altaz and EQ modes, the AZ-EQ6 boasts some other key enhancements, including a smooth and robust latitude adjustment for accurate polar alignment.

New RA and Dec clutches afford positive locking for heavy loads plus a thicker retractable counterweight shaft - 1" in diameter - and a thread-on shaft extension carry multiple counterweights with no chance of flexure.

The newly engineered equatorial head is lighter than the NEQ6, but will carry a 20kg telescope payload with ease. In Altazimuth GoTo & Tracking mode with two different telescopes, each side can hold up to a 9kg telescope. The mount comes standard with an upgraded belt-driven stepper motor drive system that can locate over 42,000 celestial objects of interest with pointing accuracy of 5 arc-minutes and tracking precision of 0.1436 arc-second steps.

The drive has closed-loop electronics, with two sets of encoders per axis, meaning that once it is aligned you can manually move the attached telescope to a new target (or accidentally bump into the telescope) and the mount will still know where it's pointing in the sky! What's more, after an inadvertent or intentional nudge, this smart mount can return to its last target or pinpoint any new target you select without requiring realignment.
This is a highly transportable, yet seriously heavy-duty mount; the mount and tripod weigh in at 23kg. (without counterweights) and the mount can be uncoupled from the tripod with a single hand knob. Loaded with great features, the Skywatcher AZ-EQ6 GoTo Mount has a secure, threaded power input jack; a built-in autoguider port for accurate astrophotographic use; and offers 9 different slew speeds (up to 4.2° per second). This performance-packed mount also features Permanent Periodic Error Correction (PPEC).

The Skywatcher AZ-EQ6's dual-width dovetail saddle accommodates both narrow (Vixen-style) and wide (Losmandy-style) dovetail attachment plates. Along with its sturdy steel-legged tripod, the mount also includes a second dovetail saddle for dual-telescope Altazimuth operations, illuminated polar axis scope with adjustable brightness, two 5.1kg counterweights, RS-232 communication cable, and 12-volt DC power cable with a secure threaded connector.
Whether you're seeking a reliable mount for astrophotography or just looking for an amazingly accurate GoTo platform for visual pursuits, let Skywatchers AZ-EQ6 shoulder the weighty responsibility for smooth, stable, and smart performance!

Two Dual-fit Saddles
Two 5kg counterweights

The Saxon AZEQ6 GT Pro Mount provides the precision and stability needed for serious observing and astro imaging

This AZEQ6 GT Pro mount includes a built-in illuminated polar scope for both Southern and Northern Hemisphere, a latitude adjuster with micrometer scale, an azimuth polar-alignment adjuster, aluminium setting circles, large manual slow-motion tracking controls, bubble level and steel tubular tripod legs

The Saxon AZEQ6 GT Pro Mount features and includes the following:

• A user friendly Synscan hand controller
• 2x 5.1Kg counter weight
• Wall-to-wall large accessory tray
• An extension 150mm counterweight shaft
• 2" stainless steel tripod legs
• Retractable counterweight shaft
• Accept narrow (V-style) or wider (D-style) dovetail mounting plates
• Smooth and quiet belt driven
• Motor resolution at 0.14arc sec (or 9.216,000 steps/rev.)
• Slew speeds from 1.25x, 1.75x, 2x, 8x, 16x, 32x, 64x, 400x, 500x, 600x, and up to 3.4°/sec (800X)
• Sidereal, Solar and Lunar tracking rates
• One, Two and Three star alignment options
• Auto guider interface for astrophotography
• Guiding speed from 0.125x, 0.25x, 0.50x, 0.75x, or 1x
• Minimal vibration for steady long-exposure astrophotography
• Payload Capacity 20Kg
• Containing over 42,900 objects with complete Messier, NGC and IC Catalogues.
• Positioning accuracy up to 5 arc minute.
• Permanent Periodic error correction (PPEC)
• Firmware upgradeable via internet download
• PC Compatibility
• Car power supply adapter included
• Requires 11 to 15V DC 2A power supply (not included).
• More Information

  Warranty Information	3-Years Limited Warranty

https://www.youtube.com/watch?v=diM2-oBYI3A

A Dream Come True

Today digital imagers require mounts with tracking accuracy up to 60 times better than that needed for visual observing. Erratic errors introduced by badly manufactured or poorly assembled components within the mount are often encountered in cheap mass produced mounts. Losmandy's use of the highest quality materials and their attention to detail provides the level of accuracy and precision needed in demanding applications.

Specifications: R.A. / DEC. AXIS

• All machined aluminium and stainless steel, black anodized.
• All stainless steel hardware.
• One 3.750” diameter needle thrust bearing.
• One 2.000” diameter needle thrust bearing.
• Two 1.500” diameter needle bearings.
• 5.625” diameter, 7075 aluminium worm gear, 360 tooth.
• Dual supported, ball bearing housed ground High Precision Brass Worm.
• Variable slip clutch, both axes. One knob per axis design.
• Porter Slip Ring Design
• 1.250” diameter stainless steel shafts.
• Through the axis polar scope mounting, works in Northern and Southern Hemisphere. Polar scope optional.
• Instrument Weight Capacity 27kg
  
• Equatorial head weight ~16kg
  

  
  

Fully locking, unique tangent arm design altitude adjustment, 6-68 degrees, large knob for easy alignment.

Laser engraved latitude scale in 2 degree increments.

Single knob azimuth control, bi-directional +/- 8.5 degree.

Locking knobs can be loosened so the movement of the azimuth control knob is smooth and effortless. You will achieve proper polar alignment with less struggle and can then lock the azimuth down once set.

5.000” diameter laser engraved setting circles:

• 4 minute R.A.with vernier reading to 1 minute
  
• 1 degrees DEC. with vernier reading to 0.1 degree
  

R.A. circle engraved for Northern and Southern Hemisphere.

TRIPOD:

* All machined aluminium, black anodized, powder coated.
* Tripod height, adjustable from 33” - 48”
* Removable leg design for easy transporting.
* Tripod weight 35 lbs.

New GEMINI 2 SERVO SYSTEM

Precision made in the U.S.A by Hollywood General Machining with software developed in Germany, the Gemini servo based, GOTO system delivers a high torque servo based computerized drive system never before seen in high quality amateur telescope mountings.

Gemini allows both stand alone and PC based control of Losmandy's G8, G-11 and Titan series mounts. The GOTO control electronics have typical Losmandy hallmarks of being fully machined, anodized and brushed, with beautifully radiused edges that look like part of a Losmandy system, rather than a third party bolt on. The new electronics control system case has been designed to fit on the existing control case mounting tabs on all Losmandy G-8, G-11 and HGM200 tripods.

• Full colour Graphic Touch Screen clearly displays all functions.
• Classic four-button pattern for guiding, centering, moving and slewing on both the touch screen and tactile membrane on the rear.
• Periodic Error Correction (PEC).
• Programmable DEC. Backlash Compensation (TVC).
• Control panel dimmer, Day and Night Modes.
• Accepts auto-guider systems.
• Northern and Southern Hemisphere operation.
• Tiltable control panel for easy access.
• Stand Alone System. No PC required
• Ethernet 10/100 with full IP function permits operation from anywhere using a browser, ASCOM, or app over the web or Serial Port
• DC Servos for imporved accuracy with higher torque than steppers
• Non-Volatile Memory and Real-Time Clock
• English, German, French & Spanish displays
• Over 40,000 objects
• USB ports; Virtual COM to PC, ASCOM or planetarium program.
• Firmware upgrade via internet
• Auto Guide Port (TTL)
• Dual 12-18V DC input/output (3.0A)

Additional Features

Built-in cable management

• USB hub (4 ports)
• 1mm Power port (3 ports)
• Shutter release port
• Auto guiding port
• The CQ350 features built-in cable management. This removes cable drag from hanging cables and reduces the risk of cables getting caught during imaging session. This capability also improves the mounts capabilities for remote use.

The built-in USB hub allows you to simply plug in your camera, guider, filter wheel and other USB accessories into the hub below the saddle plate and connect them using a single USB cable plugged into the rear of the mount. No more tangled mess of cabled hanging or need for multiple cables running around the mount.

Another addition to the cable management system is the three built-in 2.1mm ports situated next to the USB hub. This allows your accessories to also be powered through the mount. This reduces the need for multiple power adapters and other accessories. The ports can be run off of a single power source providing a cleaner set up and less cables.

On the gear of the saddle are three serial ports for various accessories such as ST4 guide cables and other serial based accessories. Like the rest of the cable management this reduces the hanging cables and provide a neat connection to the mount.

Home Positioning

The CQ350 features Automatic identification initial positioning, allowing for observatory customization.

Motors

Advanced Drive mode between worm gear and motor: synchronous wheel and synchronous belt.

PC Direct Connect

CQ350 also feature the new PC direct connect feature. Now you can easily connect your mount to your computer without the need of a hand controller. When paired with the SynScan Pro app. for Windows the mount can be aligned and controlled direct from a PC. This makes imaging refined and easier, especially for those with permanent set ups.

Optional Tripod

Please note this doesn't include a tripod. A suggestion is the Sky-Watcher tripod designed for this mount.

Specs

iOptron CEM70AW Center-Balanced Equatorial Mount

Following the success of the acclaimed iOptron CEM60, we’re excited to introduce the next generation of center-balanced equatorial mounts — the CEM70 and CEM70AW.

The CEM70AW sets a new standard in the 70 lb payload class, offering advanced features such as USB 3.0 connectivity and built-in Wi-Fi.

Precision. Balance. Performance.

Retaining the inherent advantages of the center-balance design, these medium-payload mounts deliver the efficiency, accuracy, and portability that astronomers demand.

With precise GoTo pointing and tracking accuracy better than ±5 arcseconds, the CEM70 is a solid performer for both visual observers and astrophotographers.

Innovative features such as the integrated iPolar™ electronic polar scope, large easy-lock gear levers (usable with gloves), and an advanced cable-management system demonstrate iOptron’s commitment to real-world usability.

The CEM70AW includes both the iPolar™ electronic polar scope and a hard case for convenient transport and protection.

Key Features

• New center-balanced design (CEM) for maximum payload and natural stability
• Ideal for both visual observing and astrophotography
• 70 lb (31.8 kg) payload capacity with a mount weight of only 30 lb (13.6 kg)
• Reliable, easy-to-use gear clutches
• Precision altitude and azimuth adjustments
• High-precision stepper motors (0.07 arcsec resolution) for accurate GoTo and tracking
• Integrated iPolar™ electronic polar scope
• Go2Nova® 8410 controller with Advanced GoToNova® technology and built-in heater
• High-precision tracking with periodic error < ±5 arcsec
• Permanent Periodic Error Correction (PPEC)
• Built-in 32-channel GPS
• Integrated Wi-Fi for remote operation
• USB 3.0 connection for modern data-transfer speeds
• ST-4 autoguiding port
• Advanced cable-management system with multiple output options
• Spring-loaded 8″ dual Vixen/Losmandy saddle
• Includes iOptron-subsidized TheSky Imaging Edition software

Technical Specifications

Manuals & Resources

• Quick Start Guide
• Instruction Manual
• iPolar Operation Manual

iOptron HEM44EC Mount Head! Freedom from cumbersome counterweights and shaft is here!

Introducing the HEM44EC, iOptron’s latest revolutionary hybrid strain wave drive mounts. These lightweight, compact, medium payload titans will deliver an astronomy experience like never before. Imagine a mount head weighing in at 6.2kg with a payload capability 20kg, without needing a cumbersome counterweight or shaft. Applying iOptron’s multi-decade experience creating precision mounts, the HEM44 EC Mount Head brings this vision to reality.

Utilizing state-of-the-art strain wave drive technology for the RA movement in tandem with backlash-free DEC worm/belt drive design, the HEM44 EC Mount Heade delivers unparalleled weight to payload efficiency. It's black anodized all metal CNC machined body is not only appealing to the eye, it’s a rugged platform that will perform at the highest level for many years to come. Unique features such as an electronic friction break and power down memory allow the mount safely stop and resume a GoTo slew or continue tracking even after an abrupt power loss (No need to realign and start from the beginning).

A HEM44 EC Mount Head can be controlled by a computer, either via ASCOM/Commander for a Windows PC or a third party INDI driver for a MacOS software; a SmartPhone/Tablet via iOptron Commander Lite or an App like SkySafari; or a Raspberry Pi device via INDI driver.

The HEM44EC features a high precision RA axis encoder that delivers incredible tracking accuracy, enough that many will choose to image “sans” guiding.

HEM44 mounts with low latitude range (0~22 degree) are available via special order.

More Information on iOptron HEM mounts

iOptron HEM44 EC Mount Head Features

• Advanced strain wave drive technology
• Payload capacity of 20 kg (44 lbs) with the mount weight of 6.2 kg (13.65 lbs)
• CNC machined
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• 270 second gear period
• High precision encoder with realtime PEC (RPEC)
• Go2Nova® hand controller with ~212,000 object database
• iPolar electronic polar scope for easy and accurate polar alignment
• Cable management system, no hanging exterior cables to moving parts
• Dual saddle (Vixen and Losmandy-D styles)
• Built in zero position search and locator
• Power down position and location memory
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi (via hand controller)
• USB port for firmware upgrade and computer control
• Soft carrying case
• Two year warranty
• Tripod Not included

iOptron HEM44 EC Mount Head Specifications

* 200mm, with payload center of gravity to the RA rotation axis. Or an OTA size of ~220mm.

SKU: H444A

You might also like these accessories ...

iOptron HEM44A Mount Head iPolar! Freedom from cumbersome counterweights and shaft is here!

Introducing the HEM44A Mount Head iOptron’s latest revolutionary hybrid strain wave drive mounts These light weight, compact, medium payload titans will deliver an astronomy experience like never before. Imagine a mount head weighing in at 6.2kg with a payload capability 20kg, without needing a cumbersome counterweight or shaft. Applying iOptron’s multi-decade experience creating precision mounts, the HEM44A Mount Head iPolar brings this vision to reality.

Utilizing state of the art strain wave drive technology for the RA movement in tandem with backlash-free DEC worm/belt drive design, the HEM44A Mount Head iPolar deliver unparalleled weight to payload efficiency. Its black anodized all metal CNC machined body is not only appealing to the eye, it’s a rugged platform that will perform at the highest level for many years to come. Unique features such as an electronic friction break and power down memory allow the mount safely stop and resume a GoTo slew or continue tracking even after an abrupt power loss (No need to realign and start from the beginning).

A HEM44A Mount Head can be controlled by a computer, either via ASCOM/Commander for a Windows PC or a third party INDI driver for a MacOS software; a SmartPhone/Tablet via iOptron Commander Lite or an App like SkySafari; or a Raspberry Pi device via INDI driver.

HEM44 mounts with low latitude range (0~22 degree) are available via special order.

More Information on iOptron HEM mounts

HEM44A Mount Head iPolar Features

• Advanced strain wave drive technology
• Payload capacity of 20 kg (44 lbs) with the mount weight of 6.2 kg (13.65 lbs)
• CNC machined
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• 270 second gear period
• Permanent periodic error correction (PPEC)
• Go2Nova® hand controller with ~212,000 object database
• iPolar electronic polar scope for easy and accurate polar alignment
• Cable management system, no hanging exterior cables to moving parts
• Dual saddle (Vixen and Losmandy-D styles)
• Built in zero position search and locator
• Power down position and location memory
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi (via hand controller)
• USB port for firmware upgrade and computer control
• Soft carrying case
• Two year warranty
• Tripod Not included

HEM44A Mount Head iPolar Specifications

* 200mm, with payload center of gravity to the RA rotation axis. Or an OTA size of ~220mm.

SKU: H442A

You might also like these accessories ...

This lightweight, compact, medium-payload titan will deliver an astronomy experience like never before. Imagine a mount head weighing in at less than 9 kg with a payload capability of 31 kg, without needing a cumbersome counterweight or shaft. Applying iOptron’s multi-decade experience creating precision mounts, the HAE69 makes this vision possible.

Utilizing state-of-the-art strain wave gear technology for both RA and DEC movement, the HAE69 delivers unparalleled weight-to-payload efficiency. Its black anodized, all-metal CNC machined body is not only appealing to the eye but provides a rugged platform that will perform at the highest level for many years to come. A unique electronic friction brake allows the mount to stop safely during a planned or unplanned power interruption.

The HAE69C dual SWG Alt-az/Eq mount now includes an internal main board and no longer requires a handset. The mount has USB ports on both the base and the saddle that connect directly to the main board for mount control and firmware upgrades. It also features built-in Wi-Fi for easy connection. The optional 8411 Go2Nova® handset with OLED display provides an improved user experience, especially at extreme temperatures.

Features

• Advanced strain wave gear system technology
• Payload capacity of 31 kg (69 lbs) with a mount weight of 8.6 kg (19 lbs, including dovetail saddle)
• Periodic Error < ±15 arcsec
• CNC machined construction
• Unique friction brake to safely stop movement during planned or unplanned power interruptions
• 270-second gear period
• Go2Nova® handset with OLED display for improved user experience, especially in extreme temperatures (optional)
• iPolar electronic polar scope for easy and accurate polar alignment (optional)
• Dual saddle (Vixen and Losmandy-D styles)
• Built-in zero position search and locator
• Integrated ST-4 autoguiding port
• USB ports (on both mount base and dovetail saddle) for firmware upgrades and computer control
• No cable drag
• Built-in Wi-Fi for mount control
• Aluminum carrying case
• Two-year warranty

Specs

Step up to Losmandy's modular family of Precision Equatorial Mounts. With 30+ years of proven field use and continuous improvements, Losmandy mounts are the choice of enthusiasts, serious amateurs and professionals who want great value in a mount that delivers exceptional performance. Losmandy is the only modular

mount system with the versatility to mix and match axis to right-size or upgrade your mount.

All Losmandy modular mounts feature the Gemini II, one of the most advanced astronomical computers available today.

Gemini II includes connectivity to all of today’s popular software and devices. Designed, manufactured, and performance hand-tuned in the USA.

PERFORMANCE

- ± 5 arcsecond or better uncorrected tracking (corrected PE often ± 2.5

arcsecond or better)

- Each mount individually hand-tuned at factory for optimum performance

- Instrument weight capacity: 75lbs (34kg) imaging, 90lb (40kg) visual

- Supports altitudes from 12° to 72° PRECISION COMPUTERIZED GOTO AND TRACKING

- Gemini II astronomical computer, version 5

- 42,000+ object database

- Precision pointing and tracking

- Tracking rates: sidereal, king, lunar, solar, terrestrial comet, closed loop

- Intuitive touch screen hand controller with day/twilight/night modes

- Built-in wizards for polar alignment, periodic error correction, and model building

- Built-in permanent periodic error correction

- Goto with accuracy up to ½ arcminute

CONNECTIVITY

- Mature reliable drivers for Windows, Mac, Linux including ASCOM and INDI

- USB, Ethernet, Serial (also supports SkyFi, SkyWire, WiFi, and Bluetooth adapters)

EASE OF USE

- Verified with most modern astronomical/Astro imaging systems including Maxim DL, NINA, SGP, Voyager, TheSkyX, Stellarium, Sky Safari, Cartes DuCiel, APT, BYEOS, Nebulosity, etc.

- Variable slip clutch, both axes.

- One knob per axis design.

- Through-axis polar scope, works in northern and southern hemispheres (optional add-on)

- English, German, French & Spanish displays

- Includes quick release to separate RA and DEC for easy transport and setup

- Designed, machined, assembled, and performance-tuned in the USA

- Power 12-18v DC

MECHANICAL

- Tucked-in motors for compact design

- Unique modular system enables mount upgrades one axis at a time

- Dual supported, ball bearing housed ground High Precision Brass Worm

-  RA 6.75 inch diameter 270 tooth, DEC 5.625 inch diameter 360 tooth, 7075 aluminum worm gears

- 1¼ inch diameter stainless steel weight shaft w/safety knob

- One-piece stainless steel wormblock

- Precision-machined aluminum and stainlesssteel, black anodized

- All stainless steel hardware Includes folding HD Tripod and 1x 21lb counterweight (additional counterweights in 7lbs(3kg), 11lbs (5kg), 21lbs (9.5kg) options)

ADDITIONAL SPECIFICATIONS

- Dual-width saddle-plate fits both Losmandy "D" style and Vixen “V” style dovetail

- Equatorial head weight: DEC 16lbs (7.2kg), RA 46lbs (21kg)

iOptron HEM44 Mount Head gives you Freedom from cumbersome counterweights and shaft!

Introducing the HEM44 Mount Head iOptron’s latest revolutionary hybrid strain wave drive mounts. These light weight, compact, medium payload titans will deliver an astronomy experience like never before. Imagine a mount head weighing in at 6.2kg with a payload capability 20kg, without needing a cumbersome counterweight or shaft. Applying iOptron’s multi-decade experience creating precision mounts, the HEM44 Mount Head brings this vision to reality.

Utilizing state of the art strain wave drive technology for the RA movement in tandem with backlash-free DEC worm/belt drive design, the HEM44s deliver unparalleled weight to payload efficiency. It's black anodized all metal CNC machined body is not only appealing to the eye, it’s a rugged platform that will perform at the highest level for many years to come. Unique features such as an electronic friction break and power down memory allow the mount safely stop and resume a GoTo slew or continue tracking even after an abrupt power loss (No need to realign and start from the beginning).

A HEM44 Mount Head can be controlled by a computer, either via ASCOM/Commander for a Windows PC or a third party INDI driver for a MacOS software; a SmartPhone/Tablet via iOptron Commander Lite or an App like SkySafari; or a Raspberry Pi device via INDI driver.

HEM44 mounts with low latitude range (0~22 degree) are available via special order.

More Information on iOptron HEM mounts

HEM44 Mount Head Features

• Advanced strain wave drive technology
• Payload capacity of 20 kg (44 lbs) with the mount weight of 6.2 kg (13.65 lbs)
• CNC machined
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• 270 second gear period
• Permanent periodic error correction (PPEC)
• Go2Nova® hand controller with ~212,000 object database
• Cable management system, no hanging exterior cables to moving parts
• Dual saddle (Vixen and Losmandy-D styles)
• Built in zero position search and locator
• Power down position and location memory
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi (via hand controller)
• USB port for firmware upgrade and computer control
• Soft carrying case
• Two year warranty
• Tripod Not included

HEM44 Mount Head Technical Specifications

* 200mm, with payload center of gravity to the RA rotation axis. Or an OTA size of ~220mm.

SKU: H442

You might also like these accessories ...